[0.012]**************************************** [0.049]Xilinx Versal Platform Loader and Manager [0.086]Release 2026.1 Feb 8 2026 - 18:51:12 [0.126]Platform Version: v2.0 PMC: v2.0, PS: v2.0 [0.171]BOOTMODE: 0xE, MULTIBOOT: 0xF0000000 [0.209]**************************************** [0.430]Non Secure Boot [3.515]PLM Initialization Time [3.545]***********Boot PDI Load: Started*********** [3.607]Loading PDI from SD1_LS [3.637]Monolithic/Master Device [447.499]443.902 ms: PDI initialization time [447.544]+++Loading Image#: 0x1, Name: lpd, Id: 0x04210002 [447.597]---Loading Partition#: 0x1, Id: 0xC [501.564] 53.916 ms for Partition#: 0x1, Size: 11008 Bytes [506.597]---Loading Partition#: 0x2, Id: 0x4 [518.483] 7.972 ms for Partition#: 0x2, Size: 38272 Bytes PSM Firmware version: 2026.1 [Build: Feb 8 2026 18:55:21 ] [525.986]+++Loading Image#: 0x2, Name: fpd, Id: 0x0420C003 [531.058]---Loading Partition#: 0x3, Id: 0x8 [536.793] 1.821 ms for Partition#: 0x3, Size: 4640 Bytes [539.906]+++Loading Image#: 0x3, Name: pl_cfi, Id: 0x18700000 [545.243]---Loading Partition#: 0x4, Id: 0x3 [725.263] 176.103 ms for Partition#: 0x4, Size: 708096 Bytes [727.730]---Loading Partition#: 0x5, Id: 0x5 [1243.056] 511.410 ms for Partition#: 0x5, Size: 570208 Bytes [1246.239]+++Loading Image#: 0x4, Name: subsystem, Id: 0x1C000000 [1251.305]---Loading Partition#: 0x6, Id: 0x5 [1265.236] 9.929 ms for Partition#: 0x6, Size: 49152 Bytes [1267.535]---Loading Partition#: 0x7, Id: 0x5 [1273.915] 2.380 ms for Partition#: 0x7, Size: 10288 Bytes [1276.632]---Loading Partition#: 0x8, Id: 0x6 [1547.504] 266.868 ms for Partition#: 0x8, Size: 1426288 Bytes [1550.143]---Loading Partition#: 0x9, Id: 0x7 [1560.371] 6.228 ms for Partition#: 0x9, Size: 30848 Bytes [1562.720]***********Boot PDI Load: Done*********** [1567.180]291.343 ms: ROM Time [1569.891]Total PLM Boot Time NOTICE: TF-A running on SILICON 0 NOTICE: BL31: Secure code at 0x0 NOTICE: BL31: Non secure code at 0x8000000 NOTICE: BL31: v2.14.0(release):v1.1-17580-gc1ea26c0c NOTICE: BL31: Built : 18:56:13, Feb 8 2026 U-Boot 2026.01-g20d72f5b1049 (Feb 08 2026 - 19:15:13 +0000), Build: jenkins-GITHUB_EMU-REGRESSIONS-U-BOOT_REGRESSIONS-60 CPU: Versal Silicon: v2 Chip: v2 Model: Xilinx Versal vck190 Eval board revA (QSPI) DRAM: 2 GiB (total 8 GiB) EL Level: EL2 Multiboot: 0 Core: 41 devices, 24 uclasses, devicetree: board MMC: mmc@f1050000: 0 Loading Environment from FAT... OK In: serial@ff000000 Out: serial@ff000000 Err: serial@ff000000 Net: ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id eth0: ethernet@ff0c0000Get shared mii bus on ethernet@ff0d0000 ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id , eth1: ethernet@ff0d0000 Hit any key to stop autoboot: 0 Versal> dhcp DHCP client bound to address 192.0.2.20 (1005 ms) Versal> mmc info Device: mmc@f1050000 Manufacturer ID: 3 OEM: 5344 Name: SD32G Bus Speed: 50000000 Mode: SD High Speed (50MHz) Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 29.7 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes Versal> Versal> [0.012]**************************************** [0.049]Xilinx Versal Platform Loader and Manager [0.086]Release 2026.1 Feb 8 2026 - 18:51:12 [0.126]Platform Version: v2.0 PMC: v2.0, PS: v2.0 [0.171]BOOTMODE: 0xE, MULTIBOOT: 0xF0000000 [0.209]**************************************** [0.430]Non Secure Boot [3.514]PLM Initialization Time [3.544]***********Boot PDI Load: Started*********** [3.605]Loading PDI from SD1_LS [3.635]Monolithic/Master Device [447.436]443.840 ms: PDI initialization time [447.480]+++Loading Image#: 0x1, Name: lpd, Id: 0x04210002 [447.534]---Loading Partition#: 0x1, Id: 0xC [501.476] 53.891 ms for Partition#: 0x1, Size: 11008 Bytes [506.507]---Loading Partition#: 0x2, Id: 0x4 [518.388] 7.969 ms for Partition#: 0x2, Size: 38272 Bytes PSM Firmware version: 2026.1 [Build: Feb 8 2026 18:55:21 ] [525.890]+++Loading Image#: 0x2, Name: fpd, Id: 0x0420C003 [530.962]---Loading Partition#: 0x3, Id: 0x8 [536.697] 1.820 ms for Partition#: 0x3, Size: 4640 Bytes [539.810]+++Loading Image#: 0x3, Name: pl_cfi, Id: 0x18700000 [545.145]---Loading Partition#: 0x4, Id: 0x3 [725.143] 176.081 ms for Partition#: 0x4, Size: 708096 Bytes [727.611]---Loading Partition#: 0x5, Id: 0x5 [1242.982] 511.456 ms for Partition#: 0x5, Size: 570208 Bytes [1246.163]+++Loading Image#: 0x4, Name: subsystem, Id: 0x1C000000 [1251.227]---Loading Partition#: 0x6, Id: 0x5 [1265.151] 9.925 ms for Partition#: 0x6, Size: 49152 Bytes [1267.450]---Loading Partition#: 0x7, Id: 0x5 [1273.828] 2.379 ms for Partition#: 0x7, Size: 10288 Bytes [1276.541]---Loading Partition#: 0x8, Id: 0x6 [1547.252] 266.711 ms for Partition#: 0x8, Size: 1426288 Bytes [1549.891]---Loading Partition#: 0x9, Id: 0x7 [1560.119] 6.228 ms for Partition#: 0x9, Size: 30848 Bytes [1562.467]***********Boot PDI Load: Done*********** [1566.927]291.339 ms: ROM Time [1569.638]Total PLM Boot Time NOTICE: TF-A running on SILICON 0 NOTICE: BL31: Secure code at 0x0 NOTICE: BL31: Non secure code at 0x8000000 NOTICE: BL31: v2.14.0(release):v1.1-17580-gc1ea26c0c NOTICE: BL31: Built : 18:56:13, Feb 8 2026 U-Boot 2026.01-g20d72f5b1049 (Feb 08 2026 - 19:15:13 +0000), Build: jenkins-GITHUB_EMU-REGRESSIONS-U-BOOT_REGRESSIONS-60 CPU: Versal Silicon: v2 Chip: v2 Model: Xilinx Versal vck190 Eval board revA (QSPI) DRAM: 2 GiB (total 8 GiB) EL Level: EL2 Multiboot: 0 Core: 41 devices, 24 uclasses, devicetree: board MMC: mmc@f1050000: 0 Loading Environment from FAT... OK In: serial@ff000000 Out: serial@ff000000 Err: serial@ff000000 Net: ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id eth0: ethernet@ff0c0000Get shared mii bus on ethernet@ff0d0000 ZYNQ GEM: ff0d0000, mdio bus ff0c0000, phyaddr 2, interface rgmii-id , eth1: ethernet@ff0d0000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 2007 bytes read in 12 ms (163.1 KiB/s) ## Executing script at 20000000 23175680 bytes read in 1575 ms (14 MiB/s) 30840 bytes read in 18 ms (1.6 MiB/s) 166515357 bytes read in 11278 ms (14.1 MiB/s) Moving Image from 0x80000 to 0x200000, end=0x1880000 ## Loading init Ramdisk from Legacy Image at 04000000 ... Image Name: Created: 2026-02-09 20:28:04 UTC Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 166515293 Bytes = 158.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 00001000 Booting using the fdt blob at 0x001000 Working FDT set to 1000 Loading Ramdisk to 6dfb7000, end 77e8425d ... OK Loading Device Tree to 000000006dfac000, end 000000006dfb6877 ... OK Working FDT set to 6dfac000 No RNG device Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.19.0+ (sswxtf@d51e229d9ff3) (aarch64-amd-linux-gcc.real (GCC) 13.4.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP Mon Feb 9 20:00:30 UTC 2026 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Xilinx Versal vck190 Eval board revA (QSPI) [ 0.000000] earlycon: pl11 at MMIO32 0x00000000ff000000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [pl11] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] OF: reserved mem: Reserved memory: No reserved-memory node in the DT [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000097fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000800000000-0x000000097fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000097fffffff] [ 0.000000] cma: Reserved 256 MiB at 0x000000005de00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.5 [ 0.000000] percpu: Embedded 21 pages/cpu s45336 r8192 d32488 u86016 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GICv3 CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: console=ttyAMA0 earlycon=pl011,mmio32,0xFF000000,115200n8 [ 0.000000] printk: log buffer data + meta data: 65536 + 229376 = 294912 bytes [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] software IO TLB: area num 2. [ 0.000000] software IO TLB: mapped [mem 0x000000007c000000-0x0000000080000000] (64MB) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2097152 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 160 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=1 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000f9080000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer running at 99.99MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x171015c90f, max_idle_ns: 440795203080 ns [ 0.000000] sched_clock: 57 bits at 100MHz, resolution 10ns, wraps every 4398046511101ns [ 0.008286] Console: colour dummy device 80x25 [ 0.012791] Calibrating delay loop (skipped), value calculated using timer frequency.. 199.99 BogoMIPS (lpj=399996) [ 0.023319] pid_max: default: 32768 minimum: 301 [ 0.028041] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.035694] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.044707] rcu: Hierarchical SRCU implementation. [ 0.049547] rcu: Max phase no-delay instances is 1000. [ 0.054935] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.063190] EFI services will not be available. [ 0.067843] smp: Bringing up secondary CPUs ... [ 0.150719] Detected PIPT I-cache on CPU1 [ 0.150779] GICv3: CPU1: found redistributor 1 region 0:0x00000000f90a0000 [ 0.150799] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.150861] smp: Brought up 1 node, 2 CPUs [ 0.172528] SMP: Total of 2 processors activated. [ 0.177268] CPU: All CPU(s) started at EL2 [ 0.181393] CPU features: detected: 32-bit EL0 Support [ 0.186570] CPU features: detected: CRC32 instructions [ 0.191750] CPU features: detected: PMUv3 [ 0.195815] alternatives: applying system-wide alternatives [ 0.201776] Memory: 7711692K/8388608K available (14656K kernel code, 936K rwdata, 4060K rodata, 2816K init, 351K bss, 412128K reserved, 262144K cma-reserved) [ 0.216420] devtmpfs: initialized [ 0.223321] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.233178] posixtimers hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.240656] futex hash table entries: 512 (32768 bytes on 1 NUMA nodes, total 32 KiB, linear). [ 0.250363] 27008 pages in range for non-PLT usage [ 0.250372] 518528 pages in range for PLT usage [ 0.255631] DMI not present or invalid. [ 0.264331] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.270717] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.278018] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.286112] audit: initializing netlink subsys (disabled) [ 0.291657] audit: type=2000 audit(0.208:1): state=initialized audit_enabled=0 res=1 [ 0.291932] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.306336] ASID allocator initialised with 65536 entries [ 0.311872] Serial: AMBA PL011 UART driver [ 0.317782] /axi/interrupt-controller@f9000000: Fixed dependency cycle(s) with /axi/interrupt-controller@f9000000 [ 0.330779] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.337629] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.343946] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.350787] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.357106] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.363947] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.370263] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.377103] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.451574] raid6: neonx8 gen() 3996 MB/s [ 0.523617] raid6: neonx4 gen() 3909 MB/s [ 0.595662] raid6: neonx2 gen() 3257 MB/s [ 0.667706] raid6: neonx1 gen() 2352 MB/s [ 0.739747] raid6: int64x8 gen() 2273 MB/s [ 0.811791] raid6: int64x4 gen() 2219 MB/s [ 0.883837] raid6: int64x2 gen() 2159 MB/s [ 0.955881] raid6: int64x1 gen() 1652 MB/s [ 0.960185] raid6: using algorithm neonx8 gen() 3996 MB/s [ 1.031919] raid6: .... xor() 2816 MB/s, rmw enabled [ 1.036922] raid6: using neon recovery algorithm [ 1.041867] iommu: Default domain type: Translated [ 1.046699] iommu: DMA domain TLB invalidation policy: strict mode [ 1.053114] SCSI subsystem initialized [ 1.057019] usbcore: registered new interface driver usbfs [ 1.062565] usbcore: registered new interface driver hub [ 1.067937] usbcore: registered new device driver usb [ 1.073089] mc: Linux media interface: v0.10 [ 1.077408] videodev: Linux video capture interface: v2.00 [ 1.082965] pps_core: LinuxPPS API ver. 1 registered [ 1.087968] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.097179] PTP clock support registered [ 1.101144] EDAC MC: Ver: 3.0.0 [ 1.104568] FPGA manager framework [ 1.108020] Advanced Linux Sound Architecture Driver Initialized. [ 1.114443] Bluetooth: Core ver 2.22 [ 1.118057] NET: Registered PF_BLUETOOTH protocol family [ 1.123415] Bluetooth: HCI device and connection manager initialized [ 1.129821] Bluetooth: HCI socket layer initialized [ 1.134736] Bluetooth: L2CAP socket layer initialized [ 1.139832] Bluetooth: SCO socket layer initialized [ 1.145013] clocksource: Switched to clocksource arch_sys_counter [ 1.151265] VFS: Disk quotas dquot_6.6.0 [ 1.155237] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.166472] NET: Registered PF_INET protocol family [ 1.171606] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 1.182946] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.191595] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.199412] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.207707] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 1.216298] TCP: Hash tables configured (established 65536 bind 65536) [ 1.222965] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 1.230018] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 1.237573] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.243552] RPC: Registered named UNIX socket transport module. [ 1.249533] RPC: Registered udp transport module. [ 1.254274] RPC: Registered tcp transport module. [ 1.259013] RPC: Registered tcp-with-tls transport module. [ 1.264542] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.271044] PCI: CLS 0 bytes, default 64 [ 1.275198] Trying to unpack rootfs image as initramfs... [ 1.275465] Initialise system trusted keyrings [ 1.285274] workingset: timestamp_bits=62 max_order=21 bucket_order=0 [ 1.297097] NFS: Registering the id_resolver key type [ 1.302226] Key type id_resolver registered [ 1.306443] Key type id_legacy registered [ 1.310500] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.317260] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.324888] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.361906] NET: Registered PF_ALG protocol family [ 1.366770] xor: measuring software checksum speed [ 1.372107] 8regs : 6507 MB/sec [ 1.376961] 32regs : 7077 MB/sec [ 1.381967] arm64_neon : 5308 MB/sec [ 1.386356] xor: using function: 32regs (7077 MB/sec) [ 1.391463] Key type asymmetric registered [ 1.395596] Asymmetric key parser 'x509' registered [ 1.400571] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.408042] io scheduler mq-deadline registered [ 1.412610] io scheduler kyber registered [ 1.416666] io scheduler bfq registered [ 1.421326] ledtrig-cpu: registered to indicate activity on CPUs [ 1.451198] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.458685] Serial: AMBA driver [ 1.468924] brd: module loaded [ 1.474324] loop: module loaded [ 1.480324] tun: Universal TUN/TAP device driver, 1.6 [ 1.485584] CAN device driver interface [ 1.489769] usbcore: registered new interface driver asix [ 1.495265] usbcore: registered new interface driver ax88179_178a [ 1.501446] usbcore: registered new interface driver cdc_ether [ 1.507359] usbcore: registered new interface driver net1080 [ 1.513097] usbcore: registered new interface driver cdc_subset [ 1.519094] usbcore: registered new interface driver zaurus [ 1.524740] usbcore: registered new interface driver cdc_ncm [ 1.530474] usbcore: registered new interface driver r8153_ecm [ 1.536511] VFIO - User Level meta-driver version: 0.3 [ 1.542157] usbcore: registered new interface driver uas [ 1.547587] usbcore: registered new interface driver usb-storage [ 1.553892] i2c_dev: i2c /dev entries driver [ 1.558570] usbcore: registered new interface driver uvcvideo [ 1.564741] Bluetooth: HCI UART driver ver 2.3 [ 1.569239] Bluetooth: HCI UART protocol H4 registered [ 1.574425] Bluetooth: HCI UART protocol BCSP registered [ 1.579819] Bluetooth: HCI UART protocol LL registered [ 1.585005] Bluetooth: HCI UART protocol ATH3K registered [ 1.590466] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 1.596828] Bluetooth: HCI UART protocol Intel registered [ 1.602298] Bluetooth: HCI UART protocol QCA registered [ 1.607616] usbcore: registered new interface driver bcm203x [ 1.613354] usbcore: registered new interface driver bpa10x [ 1.619008] usbcore: registered new interface driver bfusb [ 1.624569] usbcore: registered new interface driver btusb [ 1.630146] usbcore: registered new interface driver ath3k [ 1.635970] sdhci: Secure Digital Host Controller Interface driver [ 1.642228] sdhci: Copyright(c) Pierre Ossman [ 1.646629] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.652518] SMCCC: SOC_ID: ID = jep106:0049:0000 Revision = 0x00000000 [ 1.659227] zynqmp_firmware_probe Platform Management API v1.0 [ 1.665134] zynqmp_firmware_probe Trustzone version v1.0 [ 1.674532] xlnx_event_manager xlnx_event_manager: SGI 15 Registered over TF-A [ 1.681845] xlnx_event_manager xlnx_event_manager: Xilinx Event Management driver probed [ 1.734335] usbcore: registered new interface driver usbhid [ 1.739973] usbhid: USB HID core driver [ 1.744433] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available [ 1.753955] usbcore: registered new interface driver snd-usb-audio [ 1.760451] pktgen: Packet Generator for packet performance testing. Version: 2.75 [ 1.770368] Initializing XFRM netlink socket [ 1.774729] NET: Registered PF_INET6 protocol family [ 1.781358] Segment Routing with IPv6 [ 1.785100] In-situ OAM (IOAM) with IPv6 [ 1.789124] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.795421] NET: Registered PF_PACKET protocol family [ 1.800529] PFKEY is deprecated and scheduled to be removed in 2027, please contact the netdev mailing list [ 1.810374] NET: Registered PF_KEY protocol family [ 1.815236] can: controller area network core [ 1.819659] NET: Registered PF_CAN protocol family [ 1.824500] can: raw protocol [ 1.827500] can: broadcast manager protocol [ 1.831726] can: netlink gateway - max_hops=1 [ 1.836266] Bluetooth: RFCOMM TTY layer initialized [ 1.841210] Bluetooth: RFCOMM socket layer initialized [ 1.846412] Bluetooth: RFCOMM ver 1.11 [ 1.850196] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.855553] Bluetooth: BNEP filters: protocol multicast [ 1.860827] Bluetooth: BNEP socket layer initialized [ 1.865836] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.871818] Bluetooth: HIDP socket layer initialized [ 1.876860] 8021q: 802.1Q VLAN Support v1.8 [ 1.881225] 9pnet: Installing 9P2000 support [ 1.885555] Key type dns_resolver registered [ 1.895024] registered taskstats version 1 [ 1.899173] Loading compiled-in X.509 certificates [ 1.907846] Btrfs loaded, zoned=no, fsverity=no [ 1.918863] ff000000.serial: ttyAMA0 at MMIO 0xff000000 (irq = 16, base_baud = 0) is a PL011 rev3 [ 1.927878] printk: console [ttyAMA0] enabled [ 1.927878] printk: console [ttyAMA0] enabled [ 1.936651] printk: legacy bootconsole [pl11] disabled [ 1.936651] printk: legacy bootconsole [pl11] disabled [ 1.952027] spi_master spi0: SPI controller doesn't support multi CS [ 1.952050] spi_master spi0: Failed to create SPI device for /axi/spi@f1030000/flash@0 [ 6.634698] Freeing initrd memory: 162612K [ 6.644775] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x0107010b at 0xff0c0000 irq 29 (2a:14:7d:13:fd:30) [ 6.763716] macb ff0d0000.ethernet eth1: Cadence GEM rev 0x0107010b at 0xff0d0000 irq 30 (ea:00:be:43:37:55) [ 6.772612] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 6.772628] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 6.772705] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports [ 6.772712] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238fe65 hci version 0x110 quirks 0x0000808000000810 [ 6.772743] xhci-hcd xhci-hcd.0.auto: irq 31, io mem 0xfe200000 [ 6.772911] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 [ 6.772917] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.772921] usb usb1: Product: xHCI Host Controller [ 6.772924] usb usb1: Manufacturer: Linux 6.19.0+ xhci-hcd [ 6.772927] usb usb1: SerialNumber: xhci-hcd.0.auto [ 6.773776] hub 1-0:1.0: USB hub found [ 6.773796] hub 1-0:1.0: 1 port detected [ 6.777164] rtc_zynqmp f12a0000.rtc: registered as rtc0 [ 6.777178] rtc_zynqmp f12a0000.rtc: setting system clock to 2026-02-11T09:41:31 UTC (1770802891) [ 6.777319] cdns-i2c ff020000.i2c: can't get pinctrl, bus recovery not supported [ 6.777547] cdns-i2c ff020000.i2c: 100 kHz mmio ff020000 irq 34 [ 6.777677] cdns-i2c ff030000.i2c: can't get pinctrl, bus recovery not supported [ 6.777929] cdns-i2c ff030000.i2c: 100 kHz mmio ff030000 irq 35 [ 6.778283] Xilinx window watchdog fd4d0000.watchdog: Xilinx window watchdog Timer with timeout 30s [ 6.779249] cpufreq: cpufreq_policy_online: CPU0: Running at unlisted initial frequency: 1349999 kHz, changing to: 1199999 kHz [ 6.786644] clk: Disabling unused clocks [ 6.786869] PM: genpd: Disabling unused power domains [ 6.787037] ALSA device list: [ 6.787041] No soundcards found. [ 6.825040] mmc0: SDHCI controller on f1050000.mmc [f1050000.mmc] using ADMA 64-bit [ 6.826380] Freeing unused kernel memory: 2816K [ 6.826491] Run /init as init process [ 6.939886] systemd[1]: systemd 255 running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 6.939928] systemd[1]: Detected architecture arm64. Welcome to AMD Embedded Development Framework Linux distribution 25.11+development-027ae3f30fdccfa8b8043955821a11c6286cd66e (scarthgap)! [ 6.993287] systemd[1]: Hostname set to . [ 6.993474] systemd[1]: Initializing machine ID from random generator. [ 7.163985] mmc0: new high speed SDHC card at address aaaa [ 7.164565] mmcblk0: mmc0:aaaa SD32G 29.7 GiB [ 7.174392] mmcblk0: p1 [ 7.355548] systemd[1]: Queued start job for default target Multi-User System. [ 7.358671] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 7.378061] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 7.394014] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 7.409668] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 7.425396] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests t[ 7.437042] usb 1-1: new high-speed USB device number 2 using xhci-hcd o Console Directory Watch. [ 7.453387] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 7.473338] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 7.485196] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 7.501204] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 7.513214] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 7.525749] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 7.545209] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 7.561683] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 7.577436] usb 1-1: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [ 7.577462] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.577474] usb 1-1: Product: Cruzer Blade [ OK ] Listening on [ 7.577477] systemd[1]: Listening on initctl Compatibility Named Pipe. initctl Compatibility N[ 7.577482] usb 1-1: Manufacturer: SanDisk amed Pipe. [ 7.577492] usb 1-1: SerialNumber: 03026510062822114623 [ 7.620392] usb-storage 1-1:1.0: USB Mass Storage device detected [ 7.620830] scsi host0: usb-storage 1-1:1.0 [ 7.634119] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 7.649624] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 7.665751] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 7.681787] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 7.697728] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 7.713559] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 7.729603] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 7.757328] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 7.775424] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 7.795606] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 7.813618] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 7.817396] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 7.849516] systemd[1]: Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/6.19.0+/modules.devname). [ 7.852240] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 7.891802] systemd[1]: Starting Load Kernel Module dm_mod... Starting Load Kernel Module dm_mod... [ 7.912214] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 7.935866] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 7.956071] systemd[1]: Starting Load Kernel Module loop... Starting Load Kernel Module loop... Starting RPC Bi[ 7.981673] systemd[1]: Starting RPC Bind... nd... [ 7.997441] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/). [ 8.010535] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 8.023602] systemd[1]: systemd-journald.service: (This warning is only shown for the first unit using IP firewalling.) [ 8.036897] systemd[1]: Starting Journal Service... Starting Journal Service... [ 8.053810] systemd[1]: Load Kernel Modules was skipped because no trigger condition checks were met. Mounting NFSD c[ 8.069405] systemd[1]: Mounting NFSD configuration filesystem... onfiguration filesystem... [ 8.105614] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network units from Kernel command line... [ 8.139151] systemd-journald[91]: Collecting audit messages is enabled. [ 8.141530] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 8.167863] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 8.233674] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... Starting Create Static Device Nodes in /dev gracefully... [ 8.289520] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 8.309830] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 8.325645] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory /tmp. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module dm_mod. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished Load Kernel Module loop. [ OK ] Mounted NFSD configuration filesystem. [ OK ] Finished Generate network units from Kernel command line. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create Static Device Nodes in /dev gracefully. Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... Starting Grow Root File System... Starting Create System Users... [ OK ] Mounted Kernel Configuration File System. [ 8.639329] systemd-journald[91]: Received client request to flush runtime journal. [ 8.647913] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [ OK ] Finished Flush Journal to Persistent Storage. [ 8.665649] sd 0:0:0:0: [sda] 60125184 512-byte logical blocks: (30.8 GB/28.7 GiB) [FAILED] Failed to s[ 8.677993] sd 0:0:0:0: [sda] Write Protect is off tart Grow Root File System. [ 8.687841] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA See 'systemctl status systemd-growfs-root.service' for details. [ 8.745893] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 8.745916] GPT:16777313 != 60125183 [ 8.745933] GPT:Alternate GPT header not at the end of the disk. [ 8.745940] GPT:16777313 != 60125183 [ 8.745948] GPT: Use GNU Parted to correct GPT errors. [ 8.745978] sda: sda1 sda2 sda3 [ 8.773964] sd 0:0:0:0: [sda] Attached SCSI removable disk Starting User Database Manager... [ OK ] Started User Database Manager. [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting /var/volatile... Starting Rule-based Manager for Device Events and Files... [ OK ] Mounted /var/volatile. Starting Load/Save OS Random Seed... [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Automatic Boot Loader Update... Starting Create System Files and Directories... [ OK ] Finished Automatic Boot Loader Update. [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Rebuild Dynamic Linker Cache. [ OK ] Finished Create System Files and Directories. Starting Rebuild Journal Catalog... Starting Network Name Resolution... Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ OK ] Finished Rebuild Journal Catalog. [ OK ] Finished Record System Boot/Shutdown in UTMP. [ 10.044215] macb ff0d0000.ethernet end1: renamed from eth1 [ 10.065098] macb ff0c0000.ethernet end0: renamed from eth0 [ OK ] Finished Coldplug All udev Devices. [ 10.265068] random: crng init done [ OK ] Finished Load/Save OS Random Seed. [ OK ] Started Network Time Synchronization. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target System Time Set. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Update is Completed... Starting Virtual Console Setup... [ OK ] Finished Update is Completed. [ OK ] Finished Virtual Console Setup. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timer Units. [ OK ] Listening on D-Bus System Message Bus Socket. Starting sshd.socket... Starting Reboot and dump vmcore via kexec... [ OK ] Listening on sshd.socket. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. Starting D-Bus System Message Bus... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ OK ] Started System Logging Service. Starting User Login Management... Starting OpenSSH Key Generation... [ OK ] Started D-Bus System Message Bus. [ OK ] Finished Reboot and dump vmcore via kexec. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ OK ] Started User Login Management. [ OK ] Started Network Configuration. [ OK ] Reached target Network. [ OK ] Started Netperf Benchmark Server. Starting Permit User Sessions... [ OK ] Started Xinetd A Powerful Replacement For Inetd. [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyAMA0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. Starting Record Runlevel Change in UTMP... [ OK ] Finished Record Runlevel Change in UTMP. [ OK ] Finished OpenSSH Key Generation. AMD Embedded Development Framework Linux distribution 25.11+development-027ae3f30fdccfa8b8043955821a11c6286cd66e amd-edf ttyAMA0 amd-edf login: amd-edf You are required to change your password immediately (administrator enforced). New password: Retype new password: WARNING: AMD Embedded Development Framework is a reference Yocto Project distribution that should be used for testing and development purposes only. It is recommended that you create your own distribution for production use. amd-edf:~$ amd-edf:~$ sudo -s We trust you have received the usual lecture from the local System Administrator. It usually boils down to these three things: #1) Respect the privacy of others. #2) Think before you type. #3) With great power comes great responsibility. For security reasons, the password you type will not be visible. Password: amd-edf:/home/amd-edf#