Connecting to device com0. Use Ctrl-\ to escape. [0.185]Non Secure Boot [3.055]Loading PDI from OSPI [3.078]Monolithic/Master Device [4.499]FlashID=0x2C 0x5B 0x1C [6.192]OSPI mode switched to DDR [8.055]5.016 ms: PDI initialization time [8.086]+++Loading Image#: 0x1, Name: lpd, Id: 0x04210002 [8.129]---Loading Partition#: 0x1, Id: 0xC [31.844] 23.681 ms for Partition#: 0x1, Size: 9952 Bytes [36.743]Warning: PCR extension failed for image 0x1 since TPM feature is disabled ********************************************** Image Selector App Start ********************************************** ******** Boot info ******** Boot Count: 1 MaxBootCnt: 4 Rollback counter: 1 ******** Metadata info ******** Mdata.crc32: 8385C68E Mdata.version: 2 Mdata.active_index: 0 Mdata.previous_active_index: 1 Mdata.metadata_size: 7C Mdata.desc_offset: 20 Mdata.bank_state[0]: FC Mdata.bank_state[1]: FC Mdata.bank_state[2]: FF Mdata.bank_state[3]: FF Mdata.fw_desc.num_banks: 2 Mdata.fw_desc.num_images: 1 Mdata.fw_desc.img_entry_size: 50 Mdata.fw_desc.bank_info_entry_size: 18 ******** Guid info ******** Image Type Guid: F1C0D5E8-7A23-4B91-B0F8-3E5C6A2D97F3 Location Guid: D7CE8A58-CE2C-11ED-81CD-D324E93AC223 Image Guid: 7E1B930B-F6B2-EF11-8565-EB65D140066B Image Acceptance: yes Image Guid: 00D84312-F6B2-EF11-8F4F-8BDDC3AA326D Image Acceptance: yes ******** Version info ******** Image Selector Version: 1.0 Active bank image ver : amd-edf-versal-vrk160-sdt-seg-bootfw-v1.1 ******** Image Selection info ******** Reset the Boot counter as bank 0 is in accepted state Updated bank 0 to boot part register [0.012]**************************************** [0.045]Xilinx Versal Platform Loader and Manager [0.080]Release 2026.1 Jan 22 2026 - 15:10:20 [0.117]Platform Version: v2.0 PMC: v2.0, PS: v2.0 [0.156]BOOTMODE: 0x8, MULTIBOOT: 0x2B0 [0.187]**************************************** [0.404]Non Secure Boot [3.456]PLM Initialization Time [3.480]***********Boot PDI Load: Started*********** [3.534]Loading PDI from OSPI [3.557]Monolithic/Master Device [4.979]FlashID=0x2C 0x5B 0x1C [6.878]OSPI mode switched to DDR [9.043]5.526 ms: PDI initialization time [9.076]+++Loading Image#: 0x1, Name: lpd, Id: 0x04210002 [9.119]---Loading Partition#: 0x1, Id: 0xC [64.997] 55.844 ms for Partition#: 0x1, Size: 9952 Bytes [69.897]---Loading Partition#: 0x2, Id: 0x0 [74.132] 0.387 ms for Partition#: 0x2, Size: 48992 Bytes [78.703]Warning: PCR extension failed for image 0x1 since TPM feature is disabled PSM Firmware version: 2026.1 [Build: Jan 22 2026 15:10:20 ] [91.123]+++Loading Image#: 0x2, Name: pl_cfi, Id: 0x18700000 [96.397]---Loading Partition#: 0x3, Id: 0x5 [1609.963]Polling 0xF6100008 Mask: 0x10 ExpectedValue: 0x10 [3026.602]Polling 0xF6100008 Mask: 0x10 ExpectedValue: 0x10 [3545.302] 3445.057 ms for Partition#: 0x3, Size: 1838624 Bytes [3548.033]Warning: PCR extension failed for image 0x2 since TPM feature is disabled [3555.304]+++Loading Image#: 0x3, Name: aie_subsys, Id: 0x0421C005 [3561.114]---Loading Partition#: 0x4, Id: 0x7 [3567.164] 2.030 ms for Partition#: 0x4, Size: 1952 Bytes [3570.180]Warning: PCR extension failed for image 0x3 since TPM feature is disabled [3577.452]+++Loading Image#: 0x4, Name: fpd, Id: 0x0420C003 [3582.665]---Loading Partition#: 0x5, Id: 0x8 [3587.188] 0.503 ms for Partition#: 0x5, Size: 5792 Bytes [3591.729]Warning: PCR extension failed for image 0x4 since TPM feature is disabled [3599.624]+++Loading Image#: 0x5, Name: apu_ss, Id: 0x1C000000 [3604.472]---Loading Partition#: 0x6, Id: 0x0 [3608.680] 0.186 ms for Partition#: 0x6, Size: 71824 Bytes [3613.627]---Loading Partition#: 0x7, Id: 0x0 [3617.778] 0.131 ms for Partition#: 0x7, Size: 49152 Bytes [3622.781]---Loading Partition#: 0x8, Id: 0x0 [3626.838] 0.037 ms for Partition#: 0x8, Size: 10288 Bytes [3631.934]---Loading Partition#: 0x9, Id: 0x0 [3639.143] 3.189 ms for Partition#: 0x9, Size: 1290336 Bytes [3641.621]---Loading Partition#: 0xA, Id: 0x0 [3645.662] 0.022 ms for Partition#: 0xA, Size: 1984 Bytes [3650.688]---Loading Partition#: 0xB, Id: 0x0 [3654.755] 0.047 ms for Partition#: 0xB, Size: 13264 Bytes [3659.841]Warning: PCR extension failed for image 0x5 since TPM feature is disabled [3667.173]***********Boot PDI Load: Done*********** [3671.647]35.166 ms: ROM Time [3674.297]Total PLM Boot Time NOTICE: TF-A running on SILICON 0 NOTICE: BL31: Secure code at 0Hello World Succ:ssfully rae cello Wo0ld 0ppl0cationNOTICE: BL31: v2.14.0(release):v1.1-17579-g4e67ab96d NOTICE: BL31: Built : 14:11:54, Dec 23 2025 U-Boot 2026.01 (Jan 16 2026 - 10:18:58 +0000) CPU: Versal Silicon: v2 Chip: v2 Model: Xilinx Versal VRK160 Eval board revA DRAM: 2 GiB (total 16 GiB) EL Level: EL2 Multiboot: 0 Xilinx I2C FRU format at nvmem0: Manufacturer Name: XILINX Product Name: VRK160 Serial No: 522901A3009 Part Number: 5229-01 File ID: 00 Revision Number: A2 Core: 41 devices, 26 uclasses, devicetree: board MMC: mmc@f1050000: 0 Loading Environment from SPIFlash... SF: Detected mt35xu02g with page size 256 Bytes, erase size 128 KiB, total 256 MiB OK In: serial@ff000000 Out: serial@ff000000 Err: serial@ff000000 Net: ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id eth0: ethernet@ff0c0000 Missing TPMv2 device for EFI_TCG_PROTOCOL Missing RNG device for EFI_RNG_PROTOCOL starting USB... Starting the controller USB XHCI 1.10 Bus usb@fe200000: 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 Versal> Versal> efidebug boot add -b 10 "Custom Boot Entry" mmc 0:1 /Image -s "root=PARTUUID=45923539-e493-4c18-9a29-5638c8bcb456 ro rootwait earlycon uio_pdrv_genirq.of_id=generic-uio cma=1024M" Versal> efidebug boot order 10 Versal> saveenv Saving Environment to SPIFlash... Erasing SPI flash...Writing to SPI flash...done Valid environment: 1 OK Versal> boot *** U-Boot Boot Menu *** Custom Boot Entry 0. Exit Press UP/DOWN to move, ENTER to select, ESC to quit Booting: Label: Custom Boot Entry Device path: /HD(1,GPT,5692bc1a-5218-42cd-a641-87b03e12bac9,0x40,0x200000)/\Image No RNG device Removing MTD device #0 (nor0) with use count 1 [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.18.0-xilinx-g984c6a3b9186 (oe-user@oe-host) (aarch64-amd-linux-gcc (GCC) 13.4.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP Thu Jan 15 08:22:29 UTC 2026 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Xilinx Versal VRK160 Eval board revA [ 0.000000] earlycon: pl11 at MMIO32 0x00000000ff000000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [pl11] enabled [ 0.000000] efi: EFI v2.11 by Das U-Boot [ 0.000000] efi: ESRT=0x77e53040 RTPROP=0x77e59040 SMBIOS 3.0=0x7bfa5000 MEMRESERVE=0x77e32040 [ 0.000000] esrt: Reserving ESRT space from 0x0000000077e53040 to 0x0000000077e53078. [ 0.000000] OF: reserved mem: 0x0000000009800000..0x000000000985ffff (384 KiB) nomap non-reusable rproc0@9800000 [ 0.000000] OF: reserved mem: 0x0000000009860000..0x0000000009863fff (16 KiB) nomap non-reusable vdev0vring0@9860000 [ 0.000000] OF: reserved mem: 0x0000000009864000..0x0000000009867fff (16 KiB) nomap non-reusable vdev0vring1@9864000 [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000009868000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vdev0buffer@9868000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000009868000..0x0000000009967fff (1024 KiB) nomap non-reusable vdev0buffer@9868000 [ 0.000000] Reserved memory: bypass cma_reserved@800000000 node, using cmdline CMA params instead [ 0.000000] OF: reserved mem: node cma_reserved@800000000 compatible matching fail [ 0.000000] OF: reserved mem: 0x0000050000000000..0x00000500ffffffff (4194304 KiB) nomap non-reusable buffer@50000000000 [ 0.000000] OF: reserved mem: 0x0000060000000000..0x00000600ffffffff (4194304 KiB) nomap non-reusable buffer@60000000000 [ 0.000000] OF: reserved mem: 0x0000070000000000..0x00000700ffffffff (4194304 KiB) nomap non-reusable buffer@70000000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000700ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x00000000097fffff] [ 0.000000] node 0: [mem 0x0000000009800000-0x0000000009967fff] [ 0.000000] node 0: [mem 0x0000000009968000-0x0000000077bfffff] [ 0.000000] node 0: [mem 0x0000000077c00000-0x0000000077c00fff] [ 0.000000] node 0: [mem 0x0000000077c01000-0x0000000077e58fff] [ 0.000000] node 0: [mem 0x0000000077e59000-0x0000000077e59fff] [ 0.000000] node 0: [mem 0x0000000077e5a000-0x0000000077e5cfff] [ 0.000000] node 0: [mem 0x0000000077e5d000-0x0000000077e7efff] [ 0.000000] node 0: [mem 0x0000000077e7f000-0x000000007bfa4fff] [ 0.000000] node 0: [mem 0x000000007bfa5000-0x000000007bfa5fff] [ 0.000000] node 0: [mem 0x000000007bfa6000-0x000000007feaffff] [ 0.000000] node 0: [mem 0x000000007feb0000-0x000000007febffff] [ 0.000000] node 0: [mem 0x000000007fec0000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000800000000-0x000000087fffffff] [ 0.000000] node 0: [mem 0x0000050000000000-0x00000500ffffffff] [ 0.000000] node 0: [mem 0x0000060000000000-0x00000600ffffffff] [ 0.000000] node 0: [mem 0x0000070000000000-0x00000700ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000700ffffffff] [ 0.000000] cma: Reserved 1024 MiB at 0x0000000031c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.5 [ 0.000000] percpu: Embedded 31 pages/cpu s89816 r8192 d28968 u126976 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GICv3 CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: root=PARTUUID=45923539-e493-4c18-9a29-5638c8bcb456 ro rootwait earlycon uio_pdrv_genirq.of_id=generic-uio cma=1024M [ 0.000000] printk: log buffer data + meta data: 65536 + 229376 = 294912 bytes [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] software IO TLB: area num 2. [ 0.000000] software IO TLB: mapped [mem 0x0000000077fa5000-0x000000007bfa5000] (64MB) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4194304 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 160 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=1 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000f9080000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer running at 99.99MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x171015c90f, max_idle_ns: 440795203080 ns [ 0.000000] sched_clock: 57 bits at 100MHz, resolution 10ns, wraps every 4398046511101ns [ 0.008336] Console: colour dummy device 80x25 [ 0.012822] printk: legacy console [tty0] enabled [ 0.017568] printk: legacy bootconsole [pl11] disabled [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.18.0-xilinx-g984c6a3b9186 (oe-user@oe-host) (aarch64-amd-linux-gcc (GCC) 13.4.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP Thu Jan 15 08:22:29 UTC 2026 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Xilinx Versal VRK160 Eval board revA [ 0.000000] earlycon: pl11 at MMIO32 0x00000000ff000000 (options '115200n8') [ 0.000000] printk: legacy bootconsole [pl11] enabled [ 0.000000] efi: EFI v2.11 by Das U-Boot [ 0.000000] efi: ESRT=0x77e53040 RTPROP=0x77e59040 SMBIOS 3.0=0x7bfa5000 MEMRESERVE=0x77e32040 [ 0.000000] esrt: Reserving ESRT space from 0x0000000077e53040 to 0x0000000077e53078. [ 0.000000] OF: reserved mem: 0x0000000009800000..0x000000000985ffff (384 KiB) nomap non-reusable rproc0@9800000 [ 0.000000] OF: reserved mem: 0x0000000009860000..0x0000000009863fff (16 KiB) nomap non-reusable vdev0vring0@9860000 [ 0.000000] OF: reserved mem: 0x0000000009864000..0x0000000009867fff (16 KiB) nomap non-reusable vdev0vring1@9864000 [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000009868000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vdev0buffer@9868000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000009868000..0x0000000009967fff (1024 KiB) nomap non-reusable vdev0buffer@9868000 [ 0.000000] Reserved memory: bypass cma_reserved@800000000 node, using cmdline CMA params instead [ 0.000000] OF: reserved mem: node cma_reserved@800000000 compatible matching fail [ 0.000000] OF: reserved mem: 0x0000050000000000..0x00000500ffffffff (4194304 KiB) nomap non-reusable buffer@50000000000 [ 0.000000] OF: reserved mem: 0x0000060000000000..0x00000600ffffffff (4194304 KiB) nomap non-reusable buffer@60000000000 [ 0.000000] OF: reserved mem: 0x0000070000000000..0x00000700ffffffff (4194304 KiB) nomap non-reusable buffer@70000000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000700ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x00000000097fffff] [ 0.000000] node 0: [mem 0x0000000009800000-0x0000000009967fff] [ 0.000000] node 0: [mem 0x0000000009968000-0x0000000077bfffff] [ 0.000000] node 0: [mem 0x0000000077c00000-0x0000000077c00fff] [ 0.000000] node 0: [mem 0x0000000077c01000-0x0000000077e58fff] [ 0.000000] node 0: [mem 0x0000000077e59000-0x0000000077e59fff] [ 0.000000] node 0: [mem 0x0000000077e5a000-0x0000000077e5cfff] [ 0.000000] node 0: [mem 0x0000000077e5d000-0x0000000077e7efff] [ 0.000000] node 0: [mem 0x0000000077e7f000-0x000000007bfa4fff] [ 0.000000] node 0: [mem 0x000000007bfa5000-0x000000007bfa5fff] [ 0.000000] node 0: [mem 0x000000007bfa6000-0x000000007feaffff] [ 0.000000] node 0: [mem 0x000000007feb0000-0x000000007febffff] [ 0.000000] node 0: [mem 0x000000007fec0000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000800000000-0x000000087fffffff] [ 0.000000] node 0: [mem 0x0000050000000000-0x00000500ffffffff] [ 0.000000] node 0: [mem 0x0000060000000000-0x00000600ffffffff] [ 0.000000] node 0: [mem 0x0000070000000000-0x00000700ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000700ffffffff] [ 0.000000] cma: Reserved 1024 MiB at 0x0000000031c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.5 [ 0.000000] percpu: Embedded 31 pages/cpu s89816 r8192 d28968 u126976 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GICv3 CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: root=PARTUUID=45923539-e493-4c18-9a29-5638c8bcb456 ro rootwait earlycon uio_pdrv_genirq.of_id=generic-uio cma=1024M [ 0.000000] printk: log buffer data + meta data: 65536 + 229376 = 294912 bytes [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] software IO TLB: area num 2. [ 0.000000] software IO TLB: mapped [mem 0x0000000077fa5000-0x000000007bfa5000] (64MB) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4194304 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 160 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=1 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000f9080000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer running at 99.99MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x171015c90f, max_idle_ns: 440795203080 ns [ 0.000000] sched_clock: 57 bits at 100MHz, resolution 10ns, wraps every 4398046511101ns [ 0.008336] Console: colour dummy device 80x25 [ 0.012822] printk: legacy console [tty0] enabled [ 0.017568] printk: legacy bootconsole [pl11] disabled [ 0.022777] Calibrating delay loop (skipped), value calculated using timer frequency.. 199.99 BogoMIPS (lpj=399996) [ 0.022789] pid_max: default: 32768 minimum: 301 [ 0.022896] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.022915] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.024128] rcu: Hierarchical SRCU implementation. [ 0.024141] rcu: Max phase no-delay instances is 1000. [ 0.024287] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.024520] Remapping and enabling EFI services. [ 0.024645] smp: Bringing up secondary CPUs ... [ 0.081827] Detected PIPT I-cache on CPU1 [ 0.081892] GICv3: CPU1: found redistributor 1 region 0:0x00000000f90a0000 [ 0.081915] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.081977] smp: Brought up 1 node, 2 CPUs [ 0.081995] SMP: Total of 2 processors activated. [ 0.082000] CPU: All CPU(s) started at EL2 [ 0.082006] CPU features: detected: 32-bit EL0 Support [ 0.082012] CPU features: detected: CRC32 instructions [ 0.082020] CPU features: detected: PMUv3 [ 0.082049] alternatives: applying system-wide alternatives [ 0.082419] Memory: 2763612K/16777216K available (19200K kernel code, 2444K rwdata, 5676K rodata, 4672K init, 434K bss, 12960776K reserved, 1048576K cma-reserved) [ 0.082916] devtmpfs: initialized [ 0.089957] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.090000] posixtimers hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.090040] futex hash table entries: 512 (32768 bytes on 1 NUMA nodes, total 32 KiB, linear). [ 0.094942] 24608 pages in range for non-PLT usage [ 0.094954] 516128 pages in range for PLT usage [ 0.095080] pinctrl core: initialized pinctrl subsystem [ 0.095489] SMBIOS 3.7.0 present. [ 0.095507] DMI: xlnx Xilinx Versal VRK160 Eval board revA/Xilinx Versal VRK160 Eval board revA, BIOS 2026.01 01/01/2026 [ 0.095521] DMI: Memory slots populated: 0/0 [ 0.097015] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.097494] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.097571] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.097684] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.097724] audit: initializing netlink subsys (disabled) [ 0.097832] audit: type=2000 audit(0.088:1): state=initialized audit_enabled=0 res=1 [ 0.098054] thermal_sys: Registered thermal governor 'step_wise' [ 0.098184] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.098230] ASID allocator initialised with 65536 entries [ 0.098345] Serial: AMBA PL011 UART driver [ 0.102267] /axi/interrupt-controller@f9000000: Fixed dependency cycle(s) with /axi/interrupt-controller@f9000000 [ 0.106461] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.106479] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.106487] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.106493] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.106501] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.106507] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.106513] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.106519] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.174957] raid6: neonx8 gen() 4135 MB/s [ 0.243001] raid6: neonx4 gen() 4009 MB/s [ 0.311046] raid6: neonx2 gen() 3328 MB/s [ 0.379095] raid6: neonx1 gen() 2436 MB/s [ 0.447145] raid6: int64x8 gen() 2342 MB/s [ 0.515190] raid6: int64x4 gen() 2278 MB/s [ 0.583234] raid6: int64x2 gen() 2209 MB/s [ 0.651278] raid6: int64x1 gen() 1710 MB/s [ 0.651286] raid6: using algorithm neonx8 gen() 4135 MB/s [ 0.719322] raid6: .... xor() 2993 MB/s, rmw enabled [ 0.719333] raid6: using neon recovery algorithm [ 0.719823] iommu: Default domain type: Translated [ 0.719836] iommu: DMA domain TLB invalidation policy: strict mode [ 0.720009] SCSI subsystem initialized [ 0.720138] usbcore: registered new interface driver usbfs [ 0.720164] usbcore: registered new interface driver hub [ 0.720185] usbcore: registered new device driver usb [ 0.720251] mc: Linux media interface: v0.10 [ 0.720276] videodev: Linux video capture interface: v2.00 [ 0.720314] pps_core: LinuxPPS API ver. 1 registered [ 0.720321] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.720333] PTP clock support registered [ 0.720355] EDAC MC: Ver: 3.0.0 [ 0.720533] scmi_core: SCMI protocol bus registered [ 0.720573] efivars: Registered efivars operations [ 0.720756] zynqmp-ipi-mbox child@ff330000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.720812] zynqmp-ipi-mbox child@ff340000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.720864] zynqmp-ipi-mbox child@ff350000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.720915] zynqmp-ipi-mbox child@ff360000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.720970] zynqmp-ipi-mbox child@ff370000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721023] zynqmp-ipi-mbox child@ff380000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721057] zynqmp-ipi-mbox child@ff3a0000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721108] zynqmp-ipi-mbox child@ff320000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721141] zynqmp-ipi-mbox child@ff390000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721191] zynqmp-ipi-mbox child@ff310000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721373] zynqmp-ipi-mbox child@ff330000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721428] zynqmp-ipi-mbox child@ff340000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721478] zynqmp-ipi-mbox child@ff350000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721530] zynqmp-ipi-mbox child@ff360000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721582] zynqmp-ipi-mbox child@ff370000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721632] zynqmp-ipi-mbox child@ff380000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721666] zynqmp-ipi-mbox child@ff3a0000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721716] zynqmp-ipi-mbox child@ff320000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721748] zynqmp-ipi-mbox child@ff390000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.721799] zynqmp-ipi-mbox child@ff310000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722001] zynqmp-ipi-mbox child@ff330000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722054] zynqmp-ipi-mbox child@ff340000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722108] zynqmp-ipi-mbox child@ff350000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722157] zynqmp-ipi-mbox child@ff360000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722208] zynqmp-ipi-mbox child@ff370000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722261] zynqmp-ipi-mbox child@ff380000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722294] zynqmp-ipi-mbox child@ff3a0000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722344] zynqmp-ipi-mbox child@ff320000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722377] zynqmp-ipi-mbox child@ff390000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722425] zynqmp-ipi-mbox child@ff310000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722572] zynqmp-ipi-mbox child@ff330000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722623] zynqmp-ipi-mbox child@ff340000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722679] zynqmp-ipi-mbox child@ff350000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722730] zynqmp-ipi-mbox child@ff360000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722779] zynqmp-ipi-mbox child@ff370000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722830] zynqmp-ipi-mbox child@ff380000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722866] zynqmp-ipi-mbox child@ff3a0000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722916] zynqmp-ipi-mbox child@ff320000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722948] zynqmp-ipi-mbox child@ff390000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.722998] zynqmp-ipi-mbox child@ff310000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723122] zynqmp-ipi-mbox child@ff330000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723161] zynqmp-ipi-mbox child@ff340000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723195] zynqmp-ipi-mbox child@ff350000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723231] zynqmp-ipi-mbox child@ff360000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723265] zynqmp-ipi-mbox child@ff370000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723301] zynqmp-ipi-mbox child@ff380000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723352] zynqmp-ipi-mbox child@ff3a0000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723388] zynqmp-ipi-mbox child@ff320000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723413] zynqmp-ipi-mbox child@ff390000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723447] zynqmp-ipi-mbox child@ff310000: Registered ZynqMP IPI mbox with TX/RX channels. [ 0.723746] FPGA manager framework [ 0.723897] Advanced Linux Sound Architecture Driver Initialized. [ 0.724304] Bluetooth: Core ver 2.22 [ 0.724326] NET: Registered PF_BLUETOOTH protocol family [ 0.724333] Bluetooth: HCI device and connection manager initialized [ 0.724342] Bluetooth: HCI socket layer initialized [ 0.724349] Bluetooth: L2CAP socket layer initialized [ 0.724359] Bluetooth: SCO socket layer initialized [ 0.724662] clocksource: Switched to clocksource arch_sys_counter [ 0.724892] VFS: Disk quotas dquot_6.6.0 [ 0.724914] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.729097] NET: Registered PF_INET protocol family [ 0.729248] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.731152] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.731189] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.731203] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.731361] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) [ 0.731915] TCP: Hash tables configured (established 32768 bind 32768) [ 0.731995] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.732111] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.732319] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.732603] RPC: Registered named UNIX socket transport module. [ 0.732616] RPC: Registered udp transport module. [ 0.732621] RPC: Registered tcp transport module. [ 0.732627] RPC: Registered tcp-with-tls transport module. [ 0.732632] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.732646] PCI: CLS 0 bytes, default 64 [ 0.733273] Initialise system trusted keyrings [ 0.733393] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.733584] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.733824] NFS: Registering the id_resolver key type [ 0.733852] Key type id_resolver registered [ 0.733858] Key type id_legacy registered [ 0.733874] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.733886] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.734034] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.765458] NET: Registered PF_ALG protocol family [ 0.765491] xor: measuring software checksum speed [ 0.765986] 8regs : 6708 MB/sec [ 0.766443] 32regs : 7290 MB/sec [ 0.767020] arm64_neon : 5749 MB/sec [ 0.767026] xor: using function: 32regs (7290 MB/sec) [ 0.767035] Key type asymmetric registered [ 0.767041] Asymmetric key parser 'x509' registered [ 0.767077] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241) [ 0.767172] io scheduler mq-deadline registered [ 0.767181] io scheduler kyber registered [ 0.767207] io scheduler bfq registered [ 0.768157] ledtrig-cpu: registered to indicate activity on CPUs [ 0.792758] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.793746] Serial: AMBA driver [ 0.798906] brd: module loaded [ 0.801262] loop: module loaded [ 0.813168] tun: Universal TUN/TAP device driver, 1.6 [ 0.813295] CAN device driver interface [ 0.813693] usbcore: registered new interface driver asix [ 0.813725] usbcore: registered new interface driver ax88179_178a [ 0.813752] usbcore: registered new interface driver cdc_ether [ 0.813778] usbcore: registered new interface driver net1080 [ 0.813804] usbcore: registered new interface driver cdc_subset [ 0.813829] usbcore: registered new interface driver zaurus [ 0.813853] usbcore: registered new interface driver cdc_ncm [ 0.813880] usbcore: registered new interface driver r8153_ecm [ 0.814031] VFIO - User Level meta-driver version: 0.3 [ 0.814478] usbcore: registered new interface driver uas [ 0.814511] usbcore: registered new interface driver usb-storage [ 0.814530] usbcore: registered new device driver onboard-usb-dev [ 0.814898] i2c_dev: i2c /dev entries driver [ 0.815902] usbcore: registered new interface driver uvcvideo [ 0.815912] Driver for 1-wire Dallas network protocol. [ 0.816428] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev [ 0.816594] Bluetooth: HCI UART driver ver 2.3 Welcome to AMD Embedded Dev[ 0.816604] Bluetooth: HCI UART protocol H4 registered elopment Framework Linux distrib[ 0.816610] Bluetooth: HCI UART protocol BCSP registered ution 26.06+development-S0127033[ 0.816631] Bluetooth: HCI UART protocol LL registered 7 (scarthgap)! [ 0.816637] Bluetooth: HCI UART protocol ATH3K registered [ 0.816671] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 0.816711] Bluetooth: HCI UART protocol Intel registered [ 0.816726] Bluetooth: HCI UART protocol QCA registered [ 0.816759] usbcore: registered new interface driver bcm203x [ 0.816788] usbcore: registered new interface driver bpa10x [ 0.816814] usbcore: registered new interface driver bfusb [ 0.816840] usbcore: registered new interface driver btusb [ 0.816878] usbcore: registered new interface driver ath3k [ 0.817050] EDAC ZynqMP-OCM: ECC not enabled [ 0.817313] sdhci: Secure Digital Host Controller Interface driver [ 0.817321] sdhci: Copyright(c) Pierre Ossman [ 0.817326] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.817695] SMCCC: SOC_ID: ID = jep106:0049:0000 Revision = 0x00000000 [ 0.817785] zynqmp_firmware_probe Platform Management API v1.0 [ 0.817796] zynqmp_firmware_probe Trustzone version v1.0 [ 0.821735] xlnx_event_manager xlnx_event_manager: SGI 15 Registered over TF-A [ 0.821754] xlnx_event_manager xlnx_event_manager: Xilinx Event Management driver probed [ 0.865273] securefw securefw: securefw probed [ 0.865537] zynqmp-aes zynqmp-aes.0: will run requests pump with realtime priority [ 0.865807] zynqmp-sha3-384 zynqmp-sha3-384.0: will run requests pump with realtime priority [ 0.866014] usbcore: registered new interface driver usbhid [ 0.866023] usbhid: USB HID core driver [ 0.866797] remoteproc remoteproc0: ffe00000.r5f is available [ 0.868157] ARM CCI_500 PMU driver probed [ 0.868608] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available [ 0.869284] fpga_manager fpga0: Xilinx Versal FPGA Manager registered [ 0.869675] pktgen: Packet Generator for packet performance testing. Version: 2.75 [ 0.870150] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [ 0.870167] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 0.870251] IPVS: ipvs loaded. [ 0.870335] Initializing XFRM netlink socket [ 0.870382] NET: Registered PF_INET6 protocol family [ 0.870832] Segment Routing with IPv6 [ 0.870867] In-situ OAM (IOAM) with IPv6 [ 0.870925] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.871205] NET: Registered PF_PACKET protocol family [ 0.871219] NET: Registered PF_KEY protocol family [ 0.871250] Bridge firewalling registered [ 0.871257] can: controller area network core [ 0.871281] NET: Registered PF_CAN protocol family [ 0.871288] can: raw protocol [ 0.871295] can: broadcast manager protocol [ 0.871304] can: netlink gateway - max_hops=1 [ 0.871396] Bluetooth: RFCOMM TTY layer initialized [ 0.871409] Bluetooth: RFCOMM socket layer initialized [ 0.871426] Bluetooth: RFCOMM ver 1.11 [ 0.871435] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 0.871441] Bluetooth: BNEP filters: protocol multicast [ 0.871449] Bluetooth: BNEP socket layer initialized [ 0.871454] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.871462] Bluetooth: HIDP socket layer initialized [ 0.871495] 8021q: 802.1Q VLAN Support v1.8 [ 0.871646] 9pnet: Installing 9P2000 support [ 0.871679] Key type dns_resolver registered [ 0.877994] registered taskstats version 1 [ 0.878075] Loading compiled-in X.509 certificates [ 0.883771] Btrfs loaded, zoned=no, fsverity=no [ 0.890762] ff000000.serial: ttyAMA0 at MMIO 0xff000000 (irq = 23, base_baud = 0) is a PL011 rev3 [ 0.890868] printk: console [ttyAMA0] enabled [ 0.897727] ff010000.serial: ttyAMA1 at MMIO 0xff010000 (irq = 24, base_baud = 0) is a PL011 rev3 [ 0.897983] of-fpga-region fpga-region: FPGA Region probed [ 0.901496] spi-nor spi0.0: supply vcc not found, using dummy regulator [ 0.958130] 16 fixed-partitions partitions found on MTD device f1010000.spi.0 [ 0.958154] Creating 16 MTD partitions on "f1010000.spi.0": [ 0.958166] 0x000000000000-0x000000060000 : "Image Selector" [ 0.966709] 0x000000060000-0x0000000c0000 : "Image Selector Backup" [ 0.977238] 0x0000000c0000-0x0000000e0000 : "Image Selector Scratchpad" [ 0.987767] 0x0000000e0000-0x0000014e0000 : "Image Recovery" [ 0.995679] 0x0000014e0000-0x000001500000 : "Image Recovery Scratchpad" [ 1.004554] 0x000001500000-0x000001520000 : "SystemReady-DT Update Metadata" [ 1.015252] 0x000001520000-0x000001540000 : "SystemReady-DT Update Metadata Backup" [ 1.024124] 0x000001540000-0x000001560000 : "U-Boot Variables" [ 1.031706] 0x000001560000-0x000001580000 : "U-Boot Variables Backup" [ 1.042576] 0x000001580000-0x000008780000 : "Bank A Space" [ 1.053449] 0x000008780000-0x0000087a0000 : "U-Boot Variables Bank A" [ 1.064314] 0x0000087a0000-0x0000087c0000 : "U-Boot Variables Bank A Backup" [ 1.066846] 0x0000087c0000-0x00000f9c0000 : "Bank B Space" [ 1.073036] 0x00000f9c0000-0x00000f9e0000 : "U-Boot Variables Bank B" [ 1.075909] 0x00000f9e0000-0x00000fa00000 : "U-Boot Variables Bank B Backup" [ 1.089972] 0x00000fa00000-0x00000ffe0000 : "User Scratchpad" [ 1.093003] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x0107010b at 0xff0c0000 irq 36 (00:0a:35:16:c4:ea) [ 1.095173] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.095198] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.095277] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports [ 1.095290] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238fe65 hci version 0x110 quirks 0x0000808000000810 [ 1.095321] xhci-hcd xhci-hcd.0.auto: irq 38, io mem 0xfe200000 [ 1.095493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 [ 1.095506] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.095515] usb usb1: Product: xHCI Host Controller [ 1.095522] usb usb1: Manufacturer: Linux 6.18.0-xilinx-g984c6a3b9186 xhci-hcd [ 1.095529] usb usb1: SerialNumber: xhci-hcd.0.auto [ 1.095825] hub 1-0:1.0: USB hub found [ 1.095851] hub 1-0:1.0: 1 port detected [ 1.096840] rtc_zynqmp f12a0000.rtc: registered as rtc0 [ 1.096863] rtc_zynqmp f12a0000.rtc: setting system clock to 2026-01-29T11:58:40 UTC (1769687920) [ 1.097051] cdns-i2c ff020000.i2c: can't get pinctrl, bus recovery not supported [ 1.097321] cdns-i2c ff020000.i2c: 100 kHz mmio ff020000 irq 41 [ 1.097492] cdns-i2c ff030000.i2c: can't get pinctrl, bus recovery not supported [ 1.098486] at24 2-0054: supply vcc not found, using dummy regulator [ 1.103020] at24 2-0054: 16384 byte 24c128 EEPROM, writable, 1 bytes/write [ 1.103065] i2c i2c-1: Added multiplexed i2c bus 2 [ 1.103073] pca9541 1-0072: registered master selector for I2C pca9541 [ 1.103109] cdns-i2c ff030000.i2c: 100 kHz mmio ff030000 irq 42 [ 1.108679] cpufreq: cpufreq_policy_online: CPU0: Running at unlisted initial frequency: 1399999 kHz, changing to: 1400000 kHz [ 1.113162] of_cfs_init [ 1.113199] of_cfs_init: OK [ 1.113300] clk: Disabling unused clocks [ 1.113473] PM: genpd: Disabling unused power domains [ 1.113583] ALSA device list: [ 1.113589] No soundcards found. [ 1.114931] check access for rdinit=/init failed: -2, ignoring [ 1.144671] mmc0: SDHCI controller on f1050000.mmc [f1050000.mmc] using ADMA 64-bit [ 1.144822] Waiting for root device PARTUUID=45923539-e493-4c18-9a29-5638c8bcb456... [ 1.190554] mmc0: new high speed SDHC card at address aaaa [ 1.190915] mmcblk0: mmc0:aaaa SC16G 14.8 GiB [ 1.197624] mmcblk0: p1 p2 p3 [ 1.216509] EXT4-fs (mmcblk0p3): INFO: recovery required on readonly filesystem [ 1.216526] EXT4-fs (mmcblk0p3): write access will be enabled during recovery [ 1.340813] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.477155] usb 1-1: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.21 [ 1.477180] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.477189] usb 1-1: Product: USB2744 [ 1.477196] usb 1-1: Manufacturer: Microchip Tech [ 1.511553] hub 1-1:1.0: USB hub found [ 1.511648] hub 1-1:1.0: 3 ports detected [ 1.536474] EXT4-fs (mmcblk0p3): orphan cleanup on readonly fs [ 1.537646] EXT4-fs (mmcblk0p3): recovery complete [ 1.539891] EXT4-fs (mmcblk0p3): mounted filesystem eb8ad2dc-0a61-4bfe-b4af-0171c2c923b6 ro with ordered data mode. Quota mode: none. [ 1.539946] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 1.540534] devtmpfs: mounted [ 1.541945] Freeing unused kernel memory: 4672K [ 1.542041] Run /sbin/init as init process [ 1.860676] usb 1-1.3: new high-speed USB device number 3 using xhci-hcd [ 2.039269] usb 1-1.3: New USB device found, idVendor=0424, idProduct=2740, bcdDevice= 2.00 [ 2.039291] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.039301] usb 1-1.3: Product: Hub Controller [ 2.039311] usb 1-1.3: Manufacturer: Microchip Tech [ 2.648724] systemd[1]: systemd 255.21^ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS +OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 2.648763] systemd[1]: Detected architecture arm64. [ 2.801100] systemd[1]: Hostname set to . [ 3.168756] usb 1-1.2: new high-speed USB device number 4 using xhci-hcd [ 3.340075] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [ 3.340096] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.340106] usb 1-1.2: Product: Cruzer Blade [ 3.340112] usb 1-1.2: Manufacturer: SanDisk [ 3.340121] usb 1-1.2: SerialNumber: 00015614082125091009 [ 3.369378] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 3.369663] scsi host0: usb-storage 1-1.2:1.0 [ 3.521915] systemd[1]: /usr/lib/systemd/system/xen-qemu-dom0-disk-backend.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/xen/qemu-dom0.pid → /run/xen/qemu-dom0.pid; please update the unit file accordingly. [ 3.676630] systemd[1]: Queued start job for default target Multi-User System. [ 3.701021] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 3.717973] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 3.733677] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 3.748932] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 3.768856] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 3.788780] systemd[1]: Expecting device /dev/disk/by-uuid/AEEC-DA8C... Expecting device /dev/disk/by-uuid/AEEC-DA8C... [ 3.804824] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 3.816764] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 3.832749] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 3.844771] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 3.874558] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 3.892819] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 3.909187] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 3.924963] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 3.945346] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 3.965075] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.981110] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.997197] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 4.020627] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.037040] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.053085] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. Mounting Huge P[ 4.088906] systemd[1]: Mounting Huge Pages File System... ages File System... Mounting POSIX [ 4.106909] systemd[1]: Mounting POSIX Message Queue File System... Message Queue File System... [ 4.124883] systemd[1]: Mount /proc/xen files was skipped because of an unmet condition check (ConditionPathExists=/proc/xen). [ 4.136766] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 4.154996] systemd[1]: Mounting Kernel Trace File System... Mounting Kernel Trace File System... Mounting Tempor[ 4.174008] systemd[1]: Mounting Temporary Directory /tmp... ary Directory /tmp... [ 4.189039] systemd[1]: Create List of Static Device Nodes was skipped because of an unmet condition check (ConditionFileNotEmpty=/lib/modules/6.18.0-xilinx-g984c6a3b9186/modules.devname). [ 4.210345] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 4.234497] systemd[1]: Starting Load Kernel Module dm_mod... Starting Load Kernel Module dm_mod... [ 4.254476] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 4.274530] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 4.291020] systemd[1]: Starting Load Kernel Module loop... Starting Load Kernel Module loop... [ 4.309858] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 4.323245] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 4.345997] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.389016] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules 4.396633] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 m... [ 4.416921] systemd[1]: Starting Generate network units from Kernel command line... [ 4.424726] sd 0:0:0:0: [sda] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB) Starting Genera[ 4.432785] sd 0:0:0:0: [sda] Write Protect is off te network units from Kernel com[ 4.433121] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA mand line... [ 4.442629] systemd[1]: Starting Create Static Device Nodes in /dev gracefully... Starting Create Static Device Nodes in /dev gracefully... [ 4.486778] sda: sda1 [ 4.487003] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.496603] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 4.506648] systemd[1]: Started RPC Bind. [ OK ] Started 4.513053] systemd[1]: Mounted Huge Pages File System. ;39mRPC Bind. [ OK ] M[ 4.521843] systemd[1]: Mounted POSIX Message Queue File System. ounted Huge Pages File S[ 4.530687] systemd[1]: Mounted Kernel Debug File System. ystem. [ OK ] [ 4.539768] systemd[1]: Mounted Kernel Trace File System. Mounted POSIX Message Qu[ 4.547093] systemd[1]: Mounted Temporary Directory /tmp. eue File System. [ O[ 4.555853] systemd[1]: modprobe@configfs.service: Deactivated successfully. K ] Mounted Kernel [ 4.556279] systemd[1]: Finished Load Kernel Module configfs. Debug File System. [ 4.566696] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. m OK ] Mounted Ker[ 4.567085] systemd[1]: Finished Load Kernel Module dm_mod. nel Trace File System. [ 4.585741] systemd[1]: modprobe@drm.service: Deactivated successfully. 0;32m OK ] Mounted 4.586140] systemd[1]: Finished Load Kernel Module drm. 9mTemporary Directory /tmp. [ OK systemd[1]: modprobe@fuse.service: Deactivated successfully. [0m] Finished Load Kern[ 4.611111] systemd[1]: Finished Load Kernel Module fuse. el Module configfs. [ 4.629417] systemd[1]: modprobe@loop.service: Deactivated successfully. m OK ] Finished L[ 4.629878] systemd[1]: Finished Load Kernel Module loop. oad Kernel Module dm_mod. [[ 4.647393] systemd[1]: FUSE Control File System was skipped because of an unmet condition check (ConditionPathExists=/sys/fs/fuse/connections). OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Ke[ 4.668957] systemd[1]: Mounting Kernel Configuration File System... rnel Module fuse. [ OK ] Finished Loa[ 4.681459] systemd-journald[127]: Collecting audit messages is enabled. d Kernel Module loop. Mounting Kernel Configuration File System... [ 4.709745] systemd[1]: Starting Repartition Root Disk... Starting Repartition Root Disk... [ 4.718329] systemd[1]: Finished Generate network units from Kernel command line. [ OK ] Finished 4.728476] systemd[1]: Mounted Kernel Configuration File System. 1;39mGenerate network units from Kernel command line. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started 4.759222] systemd[1]: Started Journal Service. ;39mJournal Service. [ OK ] Finished File System Check on Root Device. Starting Remount Root and Kernel File Systems... [ OK ] Finished Create Static Device Nodes in /dev gracefully. [ 4.920716] EXT4-fs (mmcblk0p3): re-mounted eb8ad2dc-0a61-4bfe-b4af-0171c2c923b6 r/w. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Repartition Root Disk. Starting Grow Root File System... [ 4.989520] EXT4-fs (mmcblk0p3): resizing filesystem from 3365235 to 3365235 blocks Starting Flush Journal to Persistent Storage... Starting Create Static Device Nodes in /dev... [ 5.024158] systemd-journald[127]: Received client request to flush runtime journal. [ OK ] Finished Load Kernel Modules. [ OK ] Finished Grow Root File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. Mounting NFSD configuration filesystem... Mounting /var/volatile... Starting Apply Kernel Variables... [ 5.170270] audit: type=1334 audit(1769687924.568:2): prog-id=6 op=LOAD [ 5.176991] audit: type=1334 audit(1769687924.576:3): prog-id=7 op=LOAD Starting Rule-based Manager for Device Events and Files... [ OK ] Mounted NFSD configuration filesystem. [ OK ] Mounted /var/volatile. [ OK ] Finished Apply Kernel Variables. Starting Load/Save OS Random Seed... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Coldplug All udev Devices. [ 6.004694] random: crng init done [ 6.016058] macb ff0c0000.ethernet end0: renamed from eth0 [ OK ] Finished Load/Save OS Random Seed. [ OK ] Found device /dev/disk/by-uuid/AEEC-DA8C. Mounting /efi... [ 6.757431] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Mounted /efi. [ OK ] Reached target Local File Systems. Starting Automatic Boot Loader Update... Starting Create System Files and Directories... [ OK ] Finished Automatic Boot Loader Update. [ OK ] Finished Create System Files and Directories. [ 7.012393] audit: type=1334 audit(1769687926.408:4): prog-id=8 op=LOAD Starting Network Name Resolution... [ 7.048809] audit: type=1334 audit(1769687926.444:5): prog-id=9 op=LOAD Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ 7.130511] audit: type=1334 audit(1769687926.528:6): prog-id=10 op=LOAD [ 7.138369] audit: type=1334 audit(1769687926.536:7): prog-id=11 op=LOAD [ 7.138413] audit: type=1334 audit(1769687926.536:8): prog-id=12 op=LOAD Starting User Database Manager... [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Started User Database Manager. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Set. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timer Units. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API... Starting sshd.socket... [ OK ] Listening on Docker Socket for the API. [ OK ] Listening on sshd.socket. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. Starting D-Bus System Message Bus... Starting dfx-mgrd Dynamic Function eXchange... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ 8.162709] audit: type=1334 audit(1769687927.560:9): prog-id=13 op=LOAD Starting Authorization Manager... [ OK ] Started System Logging Service. [ 8.245602] audit: type=1334 audit(1769687927.644:10): prog-id=14 op=LOAD [ 8.252497] audit: type=1334 audit(1769687927.648:11): prog-id=15 op=LOAD Starting User Login Management... Starting OpenSSH Key Generation... [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ OK ] Started D-Bus System Message Bus. [ OK ] Started dfx-mgrd Dynamic Function eXchange. Starting dfx-mgrd Default Firmware Load Service... [ OK ] Finished OpenSSH Key Generation. [ OK ] Started User Login Management. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Virtual Console Setup... [ OK ] Started Network Configuration. [ OK ] Reached target Network. Starting containerd container runtime... Starting Wait for Network to be Configured... Starting Permit User Sessions... Starting Target Communication Framework agent... [ OK ] Started Xinetd A Powerful Replacement For Inetd. [ OK ] Finished Permit User Sessions. [ OK ] Started Console Getty. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started Target Communication Framework agent. [ OK ] Finished Virtual Console Setup. [ OK ] Started Authorization Manager. Starting Modem Manager... [ OK ] Started Modem Manager. [ OK ] Started containerd container runtime. [ OK ] Finished dfx-mgrd Default Firmware Load Service. AMD Embedded Development Framework Linux distribution 26.06+development-S01270337 amd-edf console amd-edf login: amd-edf Password: WARNING: AMD Embedded Development Framework is a reference Yocto Project distribution that should be used for testing and development purposes only. It is recommended that you create your own distribution for production use. amd-edf:~$ sudo /proc/cmdline Password: Sorry, try again. Password: sudo: /proc/cmdline: command not found amd-edf:~$ sudo cat /proc/cmdline root=PARTUUID=45923539-e493-4c18-9a29-5638c8bcb456 ro rootwait earlycon uio_pdrv_genirq.of_id=generic-uio cma=1024M amd-edf:~$ vi /efi/loader/ entries/ loader.conf random-seed amd-edf:~$ vi /efi/loader/entries/ .edf-linux.conf.swp edf-linux.conf edf-xen.conf .edf-linux.conf.un~ edf-linux.conf~ amd-edf:~$ vi /efi/loader/entries/edf-linux.conf sort-key 10-edf-linux title EDF Linux efi /Image options root=PARTUUID=45923539-e493-4c18-9a29-5638c8bcb456 ro rootwait earlycon uio_pdrv_genirq.of_id=generic-uio ~ ~ amd-edf:~$ sudo -s Password: amd-edf:/home/amd-edf# dmesg | grep -i cma [ 0.000000] Reserved memory: bypass cma_reserved@800000000 node, using cmdline CMA params instead [ 0.000000] OF: reserved mem: node cma_reserved@800000000 compatible matching fail [ 0.000000] cma: Reserved 1024 MiB at 0x0000000031c00000 [ 0.000000] Kernel command line: root=PARTUUID=45923539-e493-4c18-9a29-5638c8bcb456 ro rootwait earlycon uio_pdrv_genirq.of_id=generic-uio cma=1024M [ 0.082419] Memory: 2763612K/16777216K available (19200K kernel code, 2444K rwdata, 5676K rodata, 4672K init, 434K bss, 12960776K reserved, 1048576K cma-reserved) amd-edf:/home/amd-edf#