[0.011]**************************************
[0.043]Xilinx Versal Aiepg2 Platform Loader and Manager
[0.080]Release 2025.1   Mar 26 2025  -  02:13:26
[0.116]Platform Version: v1.0 PMC: v1.0, PS: v1.0
[0.154]BOOTMODE: 0x8, MULTIBOOT: 0x0
[0.181]************************************
[0.366]Non Secure Boot
[0.390]Device key init is skipped as no valid CDI is found
[4.618]PLM Initialization Time
[4.641]*********Boot PDI Load: Started*********
[4.715]Loading PDI from OSPI
[4.737]Monolithic/Master Device
[6.147]FlashID=0x2C 0x5B 0x1C
[8.032]OSPI mode switched to DDR
[10.318]5.640 ms: PDI initialization time
[10.350]+++Loading Image#: 0x1, Name: lpd, Id: 0x04210002
[10.393]---Loading Partition#: 0x1, Id: 0xC
[10.494]LPD T50 power sequence version 0.34
[10.541]lpd_scanclear
[10.588]LPD scan clear pass
[10.615]lpd_bisr
[10.642]lpd_mbist
[11.341]LPD MBIST pass
[86.838]Done LPD power up
[89.109] 78.682 ms for Partition#: 0x1, Size: 13984 Bytes
[94.184]+++Loading Image#: 0x2, Name: fpd, Id: 0x0420C003
[99.239]---Loading Partition#: 0x2, Id: 0x8
[103.222]FPD T50 power sequence version 0.44
[107.068]fpd_scanclear
[109.140]FPD scan clear pass
[111.694]fpd_bisr
[113.333]fpd_mbist
[117.414]FPD MBIST pass
[117.942]Done FPD power up
[119.593]MMI T50 house cleaning sequence version 0.68
[124.324]mmi_scanclear
[126.418]MMI scan clear pass
[129.175]mmi_gpu_lbist
[131.233]MMI GPU LBIST starts
[135.410]MMI GPU LBIST pass
[136.167]mmi_bisr
[137.811]mmi_gtyp_bisr
[139.868]mmi_mbist_clk_setup
[142.471]mmi_mbist
[149.989]MMI MBIST pass
[150.024]mmi_gtyp_mbist
[151.678]MMI GTYP MBIST pass
[164.715]Done MMI power up
[164.752] 61.648 ms for Partition#: 0x2, Size: 105968 Bytes
[169.531]+++Loading Image#: 0x3, Name: pl_cfi, Id: 0x18700000
[174.929]---Loading Partition#: 0x3, Id: 0x5
[179.010]npd_preconfig
[180.945]NPD T50 power sequence version 0.22
[184.914]npd_scanclear
[187.376]check_npd_scanclear
[189.534]NPD scan clear pass
[192.110]npd_pre_memclear
[194.425]unlock_ddrmc_ub
[196.655]unlock_nxu
[198.473]npd_bisr
[200.093]bisr_ddrmc_ub
[202.161]npd_memclear
[204.132]ila_clk_enable_ddrmc
[206.788]memclear_trigger_ddrmc
[209.619]memclear_trigger_nmu
[212.299]check_memclear_ddrmc
[214.948]check_memclear_nmu
[217.531]ila_clk_disable_ddrmc
[220.182]NPD mem clear pass
[222.668]nxu_odisable_assert
[225.289]efuse_secure_transfer
[228.017]unlock_ddrmc_mc
[230.351]lock_ddrmc_mc
[232.285]ub_initstate_deassert
[235.032]lock_ddrmc_ub
[237.094]lock_nxu
[238.776]Done NPD power up.
[1868.490]Polling 0xF6570008 Mask: 0x10 ExpectedValue: 0x10
[2244.050] 2065.169 ms for Partition#: 0x3, Size: 2245472 Bytes
[2246.807]+++Loading Image#: 0x4, Name: asufw, Id: 0x1C000002
[2252.210]---Loading Partition#: 0x4, Id: 0xF
[2258.419] 2.169 ms for Partition#: 0x4, Size: 448 Bytes
[2261.234]---Loading Partition#: 0x5, Id: 0xB
[2265.766] 0.494 ms for Partition#: 0x5, Size: 74000 Bytes
[2270.443]+++Loading Image#: 0x5, Name: aie2_subsys, Id: 0x0421C028
[2276.357]---Loading Partition#: 0x6, Id: 0x7
[2280.469]aie2_preconfig
[2282.639]AIE2ps T50 house cleaning sequence version 0.40
[2287.703]aie_efuse_secure_transfer
[2290.913]aie_check_efuse_secure_transfer
[2294.590]aie_scanclear
[2297.211]AIE scan clear pass
[2299.460]aie_pre_mbist
[2301.565]Value at 0x2003C07FF20: 1
[2304.714]Value at 0x2003E07FF20: 1
[2307.893]Value at 0x2004007FF20: 1
[2311.073]Value at 0x2004207FF20: 1
[2314.301]aie_bisr
[2315.983]aie_mbist
[2317.817]AIE MBIST pass
[2320.394]Done AIE power up
[2322.506] 42.109 ms for Partition#: 0x6, Size: 12848 Bytes
[2330.131]WARN XPmClock_RequestInt: Invalid parent clockIdx 0
[2338.917]+++Loading Image#: 0x6, Name: apu_ss, Id: 0x1C000000
[2341.578]---Loading Partition#: 0x7, Id: 0x0
[2345.820] 0.203 ms for Partition#: 0x7, Size: 58608 Bytes
[2350.774]---Loading Partition#: 0x8, Id: 0x0
[2355.005] 0.192 ms for Partition#: 0x8, Size: 53296 Bytes
[2359.969]---Loading Partition#: 0x9, Id: 0x0
[2364.105] 0.097 ms for Partition#: 0x9, Size: 26176 Bytes
[2369.161]---Loading Partition#: 0xA, Id: 0x0
[2376.467] 3.269 ms for Partition#: 0xA, Size: 1219424 Bytes
[2379.013]*********Boot PDI Load: Done*********
[2383.509]56.855 ms: ROM Time
[2386.171]Total PLM Boot Time
runtime console
NOTICE:  TF-A running on Silicon v0.0, RTL v8.6, PS v8.6, PMC v8.6
INFO:    CPU Revision = 0x3
INFO:    cpu_clock = 100000000Hz, uart_clock = 100000000Hz
NOTICE:  BL31: Executing from 0xbbf00000
NOTICE:  BL31: Secure code at 0x1800000
NOTICE:  BL31: Non secure code at 0x40000000
NOTICE:  BL31: v2.12.0(debug):v1.1-15203-gf418a6916-dirty
NOTICE:  BL31: Built : 11:18:22, Mar 19 2025
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    Maximum SPI INTID supported: 543
INFO:    SCMI: Server initialized
INFO:    BL31: Initializing runtime services
INFO:    BL31: cortex_a78_ae: CPU workaround for CVE 2022_23960 was applied
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x40000000
INFO:    SPSR = 0x3c9

U-Boot 2025.01-g5a324e1e94ae-dirty (Mar 26 2025 - 10:13:21 +0000)

CPU:   Versal Gen 2
Silicon: v1.0
Chip:  v1.0
Detected name: versal2-vek385-revA01
Model: AMD Versal VEK385 revA
DRAM:  2 GiB (effective 8 GiB)
EL Level:       EL2
Core:  44 devices, 24 uclasses, devicetree: board
MMC:
Loading Environment from nowhere... OK
In:    serial@f1930000
Out:   serial@f1930000
Err:   serial@f1930000
Bootmode: OSPI_MODE
Xilinx I2C FRU format at nvmem0:
 Manufacturer Name: XILINX
 Product Name: VEK385
 Serial No: 519101A01113
 Part Number: 5191-01
 File ID: 0x0
 Revision Number: A01
Net:
ZYNQ GEM: f1a60000, mdio bus f1a60000, phyaddr 1, interface rgmii-id
eth0: ethernet@f1a60000
ZYNQ GEM: ed920000, mdio bus ed920000, phyaddr 0, interface 10gbase-r

Warning: ethernet@ed920000 (eth1) using random MAC address - f6:64:28:24:5c:9c
, eth1: ethernet@ed920000
Device at ufs@f10b0000 up at:ufs-versal2-pltfm ufs@f10b0000: [RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
scanning bus for devices...
Hit any key to stop autoboot:  0
starting USB...
Bus usb@f1c00000: Register 1000440 NbrPorts 1
Starting the controller
USB XHCI 1.10
scanning bus usb@f1c00000 for devices... 3 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found

Device 0: Vendor: Generic  Rev: 1.98 Prod: Ultra HS-COMBO
            Type: Removable Hard Disk
            Capacity: 60874.0 MB = 59.4 GB (124669952 x 512)