Connecting to device com0. Use Ctrl-\ to escape. [0.185]Non Secure Boot [2.915]Loading PDI from OSPI [2.935]Monolithic/Master Device [4.354]FlashID=0x2C 0x5B 0x1C [6.158]OSPI mode switched to DDR [8.212]5.313 ms: PDI initialization time [8.241]+++Loading Image#: 0x1, Name: lpd, Id: 0x04210002 [8.280]---Loading Partition#: 0x1, Id: 0xC [32.070] 23.759 ms for Partition#: 0x1, Size: 9696 Bytes ImageSelector Version: 2.0 Boot Count: 1 MaxBootCnt: 4 Rollback counter: 1 Mdata.crc32: 8385C68E Mdata.version: 2 Mdata.active_index: 0 Mdata.previous_active_index: 1 Mdata.metadata_size: 7C Mdata.desc_offset: 20 Mdata.bank_state[0]: FC Mdata.bank_state[1]: FC Mdata.bank_state[2]: FF Mdata.bank_state[3]: FF Mdata.fw_desc.num_banks: 2 Mdata.fw_desc.num_images: 1 Mdata.fw_desc.img_entry_size: 50 Mdata.fw_desc.bank_info_entry_size: 18 Image Type Guid: F1C0D5E8-7A23-4B91-B0F8-3E5C6A2D97F3 Location Guid: D7CE8A58-CE2C-11ED-81CD-D324E93AC223 Image Guid: 7E1B930B-F6B2-EF11-8565-EB65D140066B Image Acceptance: yes Image Guid: 00D84312-F6B2-EF11-8F4F-8BDDC3AA326D Image Acceptance: yes Active bank image version: amd-edf-versal-vrk160-sdt-seg-bootfw-v25.05.2+release-S09121046 Reset the Boot counter as bank 0 is in accepted state Updated bank 0 to boot part register [0.012]**************************************** [0.042]Xilinx Versal Platform Loader and Manager [0.074]Release 2025.1 Aug 25 2025 - 16:33:53 [0.107]Platform Version: v2.0 PMC: v2.0, PS: v2.0 [0.143]BOOTMODE: 0x8, MULTIBOOT: 0x2B0 [0.171]**************************************** [0.385]Non Secure Boot [3.333]PLM Initialization Time [3.356]***********Boot PDI Load: Started*********** [3.406]Loading PDI from OSPI [3.427]Monolithic/Master Device [4.847]FlashID=0x2C 0x5B 0x1C [6.964]OSPI mode switched to DDR [9.211]5.821 ms: PDI initialization time [9.241]+++Loading Image#: 0x1, Name: lpd, Id: 0x04210002 [9.280]---Loading Partition#: 0x1, Id: 0xC [65.335] 56.023 ms for Partition#: 0x1, Size: 9696 Bytes [70.253]---Loading Partition#: 0x2, Id: 0x0 [74.558] 0.443 ms for Partition#: 0x2, Size: 70944 Bytes PSM Firmware version: 2025.1 [Build: Aug 25 2025 16:33:53 ] [84.434]+++Loading Image#: 0x2, Name: pl_cfi, Id: 0x18700000 [89.729]---Loading Partition#: 0x3, Id: 0x5 [1603.405]Polling 0xF6100008 Mask: 0x10 ExpectedValue: 0x10 [2314.897] 2221.306 ms for Partition#: 0x3, Size: 1836368 Bytes [2317.645]+++Loading Image#: 0x3, Name: aie_subsys, Id: 0x0421C005 [2323.479]---Loading Partition#: 0x4, Id: 0x7 [2329.535] 2.020 ms for Partition#: 0x4, Size: 1952 Bytes [2332.583]+++Loading Image#: 0x4, Name: fpd, Id: 0x0420C003 [2337.816]---Loading Partition#: 0x5, Id: 0x8 [2342.348] 0.496 ms for Partition#: 0x5, Size: 5792 Bytes [2347.195]+++Loading Image#: 0x5, Name: apu_ss, Id: 0x1C000000 [2352.412]---Loading Partition#: 0x6, Id: 0x0 [2356.591] 0.144 ms for Partition#: 0x6, Size: 53968 Bytes [2361.599]---Loading Partition#: 0x7, Id: 0x0 [2365.768] 0.133 ms for Partition#: 0x7, Size: 49152 Bytes [2370.787]---Loading Partition#: 0x8, Id: 0x0 [2374.878] 0.056 ms for Partition#: 0x8, Size: 18512 Bytes [2379.974]---Loading Partition#: 0x9, Id: 0x0 [2387.072] 3.063 ms for Partition#: 0x9, Size: 1234256 Bytes [2389.557]---Loading Partition#: 0xA, Id: 0x0 [2393.692] 0.100 ms for Partition#: 0xA, Size: 1984 Bytes [2398.657]---Loading Partition#: 0xB, Id: 0x0 [2402.738] 0.046 ms for Partition#: 0xB, Size: 12656 Bytes [2407.904]***********Boot PDI Load: Done*********** [2412.393]35.159 ms: ROM Time [2415.054]Total PLM Boot Time INFO: BL31: Early console setup INFO: Successfully initialized runtime conHello WorTd :uccessfrlly ran HeSlL World applicationBL31: GET_HANDOFF_PARAMS call success=0 INFO: BL31: PLM to TF-A handover success 0 NOTICE: BL31: Secure code at 0x0 NOTICE: BL31: Non secure code at 0x8000000 NOTICE: BL31: v2.12.0(debug):xlnx_rebase_v2.12_2025.1-dirty NOTICE: BL31: Built : 07:04:54, Apr 24 2025 INFO: GICv3 with legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: Maximum SPI INTID supported: 191 INFO: BL31: Initializing runtime services INFO: BL31: cortex_a72: CPU workaround for erratum 859971 was applied INFO: BL31: cortex_a72: CPU workaround for erratum 1319367 was applied INFO: BL31: cortex_a72: CPU workaround for CVE 2017_5715 was applied INFO: BL31: cortex_a72: CPU workaround for CVE 2018_3639 was applied INFO: BL31: cortex_a72: CPU workaround for CVE 2022_23960 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x8000000 INFO: SPSR = 0x3c9 U-Boot 2025.01-g95ca2579c337 (Jul 25 2025 - 11:30:19 +0000) CPU: Versal Silicon: v2 Chip: v2 Model: Xilinx Versal VRK160 Eval board revA DRAM: 2 GiB (effective 16 GiB) EL Level: EL2 Multiboot: 688 Core: 35 devices, 23 uclasses, devicetree: board MMC: mmc@f1050000: 0 Loading Environment from SPIFlash... SF: Detected mt35xu02g with page size 256 Bytes, erase size 128 KiB, total 256 MiB *** Warning - bad CRC, using default environment In: serial@ff000000 Out: serial@ff000000 Err: serial@ff000000 Bootmode: OSPI_MODE Net: ZYNQ GEM: ff0c0000, mdio bus ff0c0000, phyaddr 1, interface rgmii-id Warning: ethernet@ff0c0000 (eth0) using random MAC address - a6:42:66:af:0e:99 eth0: ethernet@ff0c0000 Cannot persist EFI variables without system partition Missing TPMv2 device for EFI_TCG_PROTOCOL Missing RNG device for EFI_RNG_PROTOCOL starting USB... Bus usb@fe200000: Register 1000440 NbrPorts 1 Starting the controller USB XHCI 1.10 scanning bus usb@fe200000 for devices... 4 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:2... Found U-Boot script /boot.scr 932 bytes read in 9 ms (100.6 KiB/s) ## Executing script at 20000000 Checking for kernel:Image Loading Image at 0x200000 26935808 bytes read in 1777 ms (14.5 MiB/s) Working FDT set to 7be92900 libfdt fdt_getprop(): FDT_ERR_NOTFOUND ## Flattened Device Tree blob at 7be92900 Booting using the fdt blob at 0x7be92900 Working FDT set to 7be92900 Loading Device Tree to 0000000077e44000, end 0000000077e542c4 ... OK Working FDT set to 77e44000 No RNG device Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 6.12.10-xilinx-g297834623cf6 (oe-user@oe-host) (aarch64-amd-linux-gcc (GCC) 13.3.0, GNU ld (GNU Binutils) 2.42.0.20240723) #1 SMP Mon Jul 21 10:14:27 UTC 2025 [ 0.000000] KASLR disabled due to lack of seed [ 0.000000] Machine model: Xilinx Versal VRK160 Eval board revA [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000800000000, size 2048 MiB [ 0.000000] OF: reserved mem: initialized node cma_reserved@800000000, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x0000000800000000..0x000000087fffffff (2097152 KiB) map reusable cma_reserved@800000000 [ 0.000000] OF: reserved mem: 0x0000050000000000..0x00000500ffffffff (4194304 KiB) nomap non-reusable buffer@50000000000 [ 0.000000] OF: reserved mem: 0x0000060000000000..0x00000600ffffffff (4194304 KiB) nomap non-reusable buffer@60000000000 [ 0.000000] OF: reserved mem: 0x0000070000000000..0x00000700ffffffff (4194304 KiB) nomap non-reusable buffer@70000000000 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000700ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] node 0: [mem 0x0000000800000000-0x000000087fffffff] [ 0.000000] node 0: [mem 0x0000050000000000-0x00000500ffffffff] [ 0.000000] node 0: [mem 0x0000060000000000-0x00000600ffffffff] [ 0.000000] node 0: [mem 0x0000070000000000-0x00000700ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000700ffffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.5 [ 0.000000] percpu: Embedded 22 pages/cpu s52248 r8192 d29672 u90112 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v3a [ 0.000000] CPU features: detected: Spectre-BHB [ 0.000000] CPU features: detected: ARM erratum 1742098 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: root=/dev/mmcblk0p3 ro rootwait uio_pdrv_genirq.of_id=generic-uio [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4194304 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] software IO TLB: area num 2. [ 0.000000] software IO TLB: mapped [mem 0x000000007b486000-0x000000007f486000] (64MB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=2. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 160 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: GICD_CTRL.DS=0, SCR_EL3.FIQ=1 [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000f9080000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x171015c90f, max_idle_ns: 440795203080 ns [ 0.000000] sched_clock: 57 bits at 100MHz, resolution 10ns, wraps every 4398046511101ns [ 0.000131] Console: colour dummy device 80x25 [ 0.000138] printk: legacy console [tty0] enabled [ 0.000364] Calibrating delay loop (skipped), value calculated using timer frequency.. 199.99 BogoMIPS (lpj=399996) [ 0.000377] pid_max: default: 32768 minimum: 301 [ 0.000467] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000483] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000998] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.004181] rcu: Hierarchical SRCU implementation. [ 0.004192] rcu: Max phase no-delay instances is 1000. [ 0.004335] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.008060] EFI services will not be available. [ 0.008168] smp: Bringing up secondary CPUs ... [ 0.132664] Detected PIPT I-cache on CPU1 [ 0.132703] GICv3: CPU1: found redistributor 1 region 0:0x00000000f90a0000 [ 0.132724] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.132785] smp: Brought up 1 node, 2 CPUs [ 0.132807] SMP: Total of 2 processors activated. [ 0.132813] CPU: All CPU(s) started at EL2 [ 0.132819] CPU features: detected: 32-bit EL0 Support [ 0.132825] CPU features: detected: CRC32 instructions [ 0.132860] alternatives: applying system-wide alternatives [ 0.133371] Memory: 1726736K/16777216K available (16960K kernel code, 1088K rwdata, 4976K rodata, 3136K init, 484K bss, 12949968K reserved, 2097152K cma-reserved) [ 0.133811] devtmpfs: initialized [ 0.139653] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.139680] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.154613] 26048 pages in range for non-PLT usage [ 0.154623] 517568 pages in range for PLT usage [ 0.154725] pinctrl core: initialized pinctrl subsystem [ 0.154995] DMI not present or invalid. [ 0.156563] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.156975] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.157030] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.157079] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.157119] audit: initializing netlink subsys (disabled) [ 0.157573] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.157595] audit: type=2000 audit(0.156:1): state=initialized audit_enabled=0 res=1 [ 0.157636] ASID allocator initialised with 65536 entries [ 0.157743] Serial: AMBA PL011 UART driver [ 0.160562] /axi/interrupt-controller@f9000000: Fixed dependency cycle(s) with /axi/interrupt-controller@f9000000 [ 0.163676] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.163693] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.163701] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.163708] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.163715] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.163721] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.163728] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.163734] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.232198] raid6: neonx8 gen() 4151 MB/s [ 0.300237] raid6: neonx4 gen() 4054 MB/s [ 0.368279] raid6: neonx2 gen() 3374 MB/s [ 0.436325] raid6: neonx1 gen() 2444 MB/s [ 0.504369] raid6: int64x8 gen() 2339 MB/s [ 0.572407] raid6: int64x4 gen() 2291 MB/s [ 0.640453] raid6: int64x2 gen() 2229 MB/s [ 0.708497] raid6: int64x1 gen() 1716 MB/s [ 0.708504] raid6: using algorithm neonx8 gen() 4151 MB/s [ 0.776528] raid6: .... xor() 3020 MB/s, rmw enabled [ 0.776535] raid6: using neon recovery algorithm [ 0.776875] iommu: Default domain type: Translated [ 0.776885] iommu: DMA domain TLB invalidation policy: strict mode [ 0.777058] SCSI subsystem initialized [ 0.777170] usbcore: registered new interface driver usbfs [ 0.777190] usbcore: registered new interface driver hub [ 0.777209] usbcore: registered new device driver usb [ 0.777278] mc: Linux media interface: v0.10 [ 0.777301] videodev: Linux video capture interface: v2.00 [ 0.777323] pps_core: LinuxPPS API ver. 1 registered [ 0.777329] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.777341] PTP clock support registered [ 0.777365] EDAC MC: Ver: 3.0.0 [ 0.777519] scmi_core: SCMI protocol bus registered [ 0.777722] FPGA manager framework [ 0.777844] Advanced Linux Sound Architecture Driver Initialized. [ 0.778130] Bluetooth: Core ver 2.22 [ 0.778153] NET: Registered PF_BLUETOOTH protocol family [ 0.778160] Bluetooth: HCI device and connection manager initialized [ 0.778169] Bluetooth: HCI socket layer initialized [ 0.778176] Bluetooth: L2CAP socket layer initialized [ 0.778187] Bluetooth: SCO socket layer initialized [ 0.778487] clocksource: Switched to clocksource arch_sys_counter [ 0.778628] VFS: Disk quotas dquot_6.6.0 [ 0.778646] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.782722] NET: Registered PF_INET protocol family [ 0.782834] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.783875] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.783900] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.783913] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.783996] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 0.784276] TCP: Hash tables configured (established 16384 bind 16384) [ 0.784330] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.784369] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.784456] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.784716] RPC: Registered named UNIX socket transport module. [ 0.784726] RPC: Registered udp transport module. [ 0.784732] RPC: Registered tcp transport module. [ 0.784737] RPC: Registered tcp-with-tls transport module. [ 0.784743] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.784755] PCI: CLS 0 bytes, default 64 [ 0.785453] Initialise system trusted keyrings [ 0.785563] workingset: timestamp_bits=46 max_order=20 bucket_order=0 [ 0.785959] NFS: Registering the id_resolver key type [ 0.785991] Key type id_resolver registered [ 0.785997] Key type id_legacy registered [ 0.786013] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.786021] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.786140] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.817155] NET: Registered PF_ALG protocol family [ 0.817175] xor: measuring software checksum speed [ 0.817670] 8regs : 6707 MB/sec [ 0.818127] 32regs : 7294 MB/sec [ 0.818716] arm64_neon : 5638 MB/sec [ 0.818723] xor: using function: 32regs (7294 MB/sec) [ 0.818733] Key type asymmetric registered [ 0.818740] Asymmetric key parser 'x509' registered [ 0.818781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.818864] io scheduler mq-deadline registered [ 0.818874] io scheduler kyber registered [ 0.818898] io scheduler bfq registered [ 0.821483] ledtrig-cpu: registered to indicate activity on CPUs [ 0.846627] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.847553] Serial: AMBA driver [ 0.852109] brd: module loaded [ 0.854406] loop: module loaded [ 0.857288] CAN device driver interface [ 0.857602] usbcore: registered new interface driver asix [ 0.857621] usbcore: registered new interface driver ax88179_178a [ 0.857638] usbcore: registered new interface driver cdc_ether [ 0.857657] usbcore: registered new interface driver net1080 [ 0.857674] usbcore: registered new interface driver cdc_subset [ 0.857692] usbcore: registered new interface driver zaurus [ 0.857711] usbcore: registered new interface driver cdc_ncm [ 0.857727] usbcore: registered new interface driver r8153_ecm [ 0.857876] VFIO - User Level meta-driver version: 0.3 [ 0.858225] usbcore: registered new interface driver uas [ 0.858245] usbcore: registered new interface driver usb-storage [ 0.858265] usbcore: registered new device driver onboard-usb-dev [ 0.858566] i2c_dev: i2c /dev entries driver [ 0.859402] usbcore: registered new interface driver uvcvideo [ 0.859411] Driver for 1-wire Dallas network protocol. [ 0.859769] Bluetooth: HCI UART driver ver 2.3 [ 0.859779] Bluetooth: HCI UART protocol H4 registered [ 0.859786] Bluetooth: HCI UART protocol BCSP registered [ 0.859805] Bluetooth: HCI UART protocol LL registered [ 0.859812] Bluetooth: HCI UART protocol ATH3K registered [ 0.859826] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 0.859853] Bluetooth: HCI UART protocol Intel registered [ 0.859868] Bluetooth: HCI UART protocol QCA registered [ 0.859885] usbcore: registered new interface driver bcm203x [ 0.859905] usbcore: registered new interface driver bpa10x [ 0.859922] usbcore: registered new interface driver bfusb [ 0.859938] usbcore: registered new interface driver btusb [ 0.859966] usbcore: registered new interface driver ath3k [ 0.860115] EDAC ZynqMP-OCM: ECC not enabled [ 0.860347] sdhci: Secure Digital Host Controller Interface driver [ 0.860355] sdhci: Copyright(c) Pierre Ossman [ 0.860361] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.860652] SMCCC: SOC_ID: ID = jep106:0049:0000 Revision = 0x00000000 [ 0.860743] zynqmp_firmware_probe Platform Management API v1.0 [ 0.860786] zynqmp_firmware_probe Trustzone version v1.0 [ 0.861288] xlnx_event_manager xlnx_event_manager: SGI 15 Registered over TF-A [ 0.861303] xlnx_event_manager xlnx_event_manager: Xilinx Event Management driver probed [ 0.910197] securefw securefw: securefw probed [ 0.910468] xilinx_ecdsa xilinx_ecdsa.0: will run requests pump with realtime priority [ 0.910741] zynqmp-aes zynqmp-aes.0: will run requests pump with realtime priority [ 0.910957] zynqmp-sha3-384 zynqmp-sha3-384.0: will run requests pump with realtime priority [ 0.911049] usbcore: registered new interface driver usbhid [ 0.911058] usbhid: USB HID core driver [ 0.912420] ARM CCI_500 PMU driver probed [ 0.912687] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 (0,8000003f) counters available [ 0.913247] fpga_manager fpga0: Xilinx Versal FPGA Manager registered [ 0.913691] pktgen: Packet Generator for packet performance testing. Version: 2.75 [ 0.914147] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP) [ 0.914163] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 0.914242] IPVS: ipvs loaded. [ 0.914335] Initializing XFRM netlink socket [ 0.914370] NET: Registered PF_INET6 protocol family [ 0.914798] Segment Routing with IPv6 [ 0.914829] In-situ OAM (IOAM) with IPv6 [ 0.914898] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.915170] NET: Registered PF_PACKET protocol family [ 0.915184] NET: Registered PF_KEY protocol family [ 0.915212] Bridge firewalling registered [ 0.915218] can: controller area network core [ 0.915240] NET: Registered PF_CAN protocol family [ 0.915247] can: raw protocol [ 0.915254] can: broadcast manager protocol [ 0.915264] can: netlink gateway - max_hops=1 [ 0.915348] Bluetooth: RFCOMM TTY layer initialized [ 0.915361] Bluetooth: RFCOMM socket layer initialized [ 0.915379] Bluetooth: RFCOMM ver 1.11 [ 0.915390] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 0.915398] Bluetooth: BNEP filters: protocol multicast [ 0.915405] Bluetooth: BNEP socket layer initialized [ 0.915411] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.915418] Bluetooth: HIDP socket layer initialized [ 0.915447] 8021q: 802.1Q VLAN Support v1.8 [ 0.915578] 9pnet: Installing 9P2000 support [ 0.915623] Key type dns_resolver registered [ 0.915722] NET: Registered PF_VSOCK protocol family [ 0.921126] registered taskstats version 1 [ 0.921195] Loading compiled-in X.509 certificates [ 0.928316] Btrfs loaded, zoned=no, fsverity=no [ 1.003246] ff000000.serial: ttyAMA0 at MMIO 0xff000000 (irq = 18, base_baud = 0) is a PL011 rev3 [ 1.003282] printk: legacy console [ttyAMA0] enabled [ 2.532812] ff010000.serial: ttyAMA1 at MMIO 0xff010000 (irq = 19, base_baud = 0) is a PL011 rev3 [ 2.541951] of-fpga-region fpga-region: FPGA Region probed [ 2.548627] spi-nor spi0.0: unrecognized JEDEC id bytes: ff ff ff ff ff ff [ 2.556881] rtc_zynqmp f12a0000.rtc: registered as rtc0 [ 2.562143] rtc_zynqmp f12a0000.rtc: setting system clock to 2008-10-23T21:20:25 UTC (1224796825) [ 2.571243] cdns-i2c ff020000.i2c: can't get pinctrl, bus recovery not supported [ 2.578964] cdns-i2c ff020000.i2c: 100 kHz mmio ff020000 irq 24 [ 2.585076] cdns-i2c ff030000.i2c: can't get pinctrl, bus recovery not supported [ 2.593447] at24 2-0054: supply vcc not found, using dummy regulator [ 2.604345] at24 2-0054: 16384 byte 24c128 EEPROM, writable, 1 bytes/write [ 2.611267] i2c i2c-1: Added multiplexed i2c bus 2 [ 2.616073] pca9541 1-0072: registered master selector for I2C pca9541 [ 2.622640] cdns-i2c ff030000.i2c: 100 kHz mmio ff030000 irq 25 [ 2.629081] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1399999 KHz, changing to: 1400000 KHz [ 2.641149] of_cfs_init [ 2.643638] of_cfs_init: OK [ 2.646504] clk: Disabling unused clocks [ 2.650585] PM: genpd: Disabling unused power domains [ 2.656285] ALSA device list: [ 2.659253] No soundcards found. [ 2.662997] Waiting for root device /dev/mmcblk0p3... [ 12.770593] xilinx-zynqmp-dma ffa80000.dma-controller: deferred probe timeout, ignoring dependency [ 12.779890] xilinx-zynqmp-dma ffa90000.dma-controller: deferred probe timeout, ignoring dependency [ 12.789251] xilinx-zynqmp-dma ffaa0000.dma-controller: deferred probe timeout, ignoring dependency [ 12.798364] sdhci-arasan f1050000.mmc: deferred probe timeout, ignoring dependency [ 12.805962] xilinx-zynqmp-dma ffab0000.dma-controller: deferred probe timeout, ignoring dependency [ 12.815229] xilinx-zynqmp-dma ffac0000.dma-controller: deferred probe timeout, ignoring dependency [ 12.824407] xilinx-zynqmp-dma ffad0000.dma-controller: deferred probe timeout, ignoring dependency [ 12.833578] xilinx-zynqmp-dma ffae0000.dma-controller: deferred probe timeout, ignoring dependency [ 12.842741] xilinx-zynqmp-dma ffaf0000.dma-controller: deferred probe timeout, ignoring dependency [ 12.851962] macb ff0c0000.ethernet: deferred probe timeout, ignoring dependency [ 12.860821] macb ff0c0000.ethernet eth0: Cadence GEM rev 0x0107010b at 0xff0c0000 irq 35 (a6:42:66:af:0e:99) [ 12.870829] dwc3 fe200000.usb: deferred probe timeout, ignoring dependency [ 12.878202] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 12.883714] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 12.891440] xhci-hcd xhci-hcd.1.auto: USB3 root hub has no ports [ 12.897448] xhci-hcd xhci-hcd.1.auto: hcc params 0x0238fe65 hci version 0x110 quirks 0x0000808000000810 [ 12.898492] mmc0: SDHCI controller on f1050000.mmc [f1050000.mmc] using ADMA 64-bit [ 12.906857] xhci-hcd xhci-hcd.1.auto: irq 36, io mem 0xfe200000 [ 12.920612] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 12.928891] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.936117] usb usb1: Product: xHCI Host Controller [ 12.940992] usb usb1: Manufacturer: Linux 6.12.10-xilinx-g297834623cf6 xhci-hcd [ 12.948308] usb usb1: SerialNumber: xhci-hcd.1.auto [ 12.953468] hub 1-0:1.0: USB hub found [ 12.957245] hub 1-0:1.0: 1 port detected [ 13.206486] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 13.221571] mmc0: new high speed SDXC card at address aaaa [ 13.227433] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 13.233284] mmcblk0: p1 p2 p3 p4 [ 13.347031] usb 1-1: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.21 [ 13.355231] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.362366] usb 1-1: Product: USB2744 [ 13.366026] usb 1-1: Manufacturer: Microchip Tech [ 13.432642] hub 1-1:1.0: USB hub found [ 13.436448] hub 1-1:1.0: 3 ports detected [ 13.452744] EXT4-fs (mmcblk0p3): orphan cleanup on readonly fs [ 13.459993] EXT4-fs (mmcblk0p3): mounted filesystem 8a19ead7-99ea-4b38-b8ae-2064f9a6dea3 ro with ordered data mode. Quota mode: none. [ 13.472083] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 13.479535] devtmpfs: mounted [ 13.483332] Freeing unused kernel memory: 3136K [ 13.487931] Run /sbin/init as init process [ 13.778499] usb 1-1.3: new high-speed USB device number 3 using xhci-hcd [ 13.891185] usb 1-1.3: New USB device found, idVendor=0424, idProduct=2740, bcdDevice= 2.00 [ 13.899567] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.906883] usb 1-1.3: Product: Hub Controller [ 13.911326] usb 1-1.3: Manufacturer: Microchip Tech [ 14.005967] systemd[1]: System time before build time, advancing clock. [ 14.075135] systemd[1]: systemd 255.17^ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 14.107118] systemd[1]: Detected architecture arm64. Welcome to AMD Embedded Development Framework Linux distribution 25.05.2+release-S09121046 (scarthgap)! [ 14.131975] systemd[1]: Hostname set to . [ 14.148900] systemd[1]: Initializing machine ID from random generator. [ 14.155578] systemd[1]: Installed transient /etc/machine-id file. [ 14.550757] systemd[1]: Queued start job for default target Multi-User System. [ 14.593581] systemd[1]: Created slice Slice /system/getty. [ OK ] Created slice Slice /system/getty. [ 14.611778] systemd[1]: Created slice Slice /system/modprobe. [ OK ] Created slice Slice /system/modprobe. [ 14.627780] systemd[1]: Created slice Slice /system/serial-getty. [ OK ] Created slice Slice /system/serial-getty. [ 14.643476] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 14.658748] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ 14.678668] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ 14.698600] systemd[1]: Expecting device /dev/disk/by-label/boot... Expecting device /dev/disk/by-label/boot... [ 14.714552] systemd[1]: Expecting device /dev/disk/by-label/esp... Expecting device /dev/disk/by-label/esp... [ 14.730636] systemd[1]: Reached target Path Units. [ OK ] Reached target Path Units. [ 14.742576] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 14.758565] systemd[1]: Reached target Slice Units. [ OK ] Reached target Slice Units. [ 14.770573] systemd[1]: Reached target Swaps. [ OK ] Reached target Swaps. [ 14.809472] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 14.826633] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 14.842990] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 14.858784] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 14.879199] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 14.894903] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 14.910960] systemd[1]: Listening on Journal Socket. [ 14.915958] usb 1-1.2: new high-speed USB device number 4 using xhci-hcd [ OK ] Listening on Journal Socket. [ 14.931023] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 14.947003] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 14.962845] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 14.978904] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 15.010704] systemd[1]: Mounting Huge Pages File System... [ 15.010841] usb 1-1.2: New USB device found, idVendor=0781, idProduct=5567, bcdDevice= 1.00 [ 15.024579] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 15.024584] usb 1-1.2: Product: Cruzer Blade [ 15.036172] usb 1-1.2: Manufacturer: SanDisk Mounting Huge P[ 15.040453] usb 1-1.2: SerialNumber: 00017318121524113523 ages File System... [ 15.050069] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 15.057515] scsi host0: usb-storage 1-1.2:1.0 [ 15.086876] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 15.108777] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 15.122807] systemd[1]: Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 15.140468] systemd[1]: Mounting Temporary Directory /tmp... Mounting Temporary Directory /tmp... [ 15.166997] systemd[1]: Starting Create List of Static Device Nodes... Starting Create List of Static [ 15.176160] systemd[1]: Starting Load Kernel Module configfs... Device Nodes... Starting Load Kernel Module configfs... [ 15.212911] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm[ 15.221002] systemd[1]: Starting Load Kernel Module fuse... ... Starting Load Kernel Module fuse... [ 15.252904] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 15.277562] systemd[1]: Starting File System Check on Root Device... Starting File System Check on Root Device... [ 15.304980] systemd[1]: Starting Journal Service... Starting Journal Service... [ 15.338838] systemd[1]: Starting Load Kernel Modules... Starting Load Kernel Modules... [ 15.350271] systemd[1]: Starting Generate network units from Kernel command line... Starting Generate network units from Kernel command line... [ 15.367381] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 15.378459] systemd[1]: Started RPC Bind. [ 15.385817] systemd-journald[207]: Collecting audit messages is enabled. [ OK ] Started 15.393244] systemd[1]: Mounted Huge Pages File System. ;39mRPC Bind. [ OK [ 15.401316] systemd[1]: Mounted POSIX Message Queue File System. ] Mounted Huge Pages Fil[ 15.410594] systemd[1]: Mounted Kernel Debug File System. e System. [ OK ][ 15.418945] systemd[1]: Mounted Temporary Directory /tmp. Mounted POSIX Message Qu[ 15.427726] systemd[1]: Finished Create List of Static Device Nodes. eue File System. [ OK[ 15.437184] systemd[1]: modprobe@configfs.service: Deactivated successfully. ] Mounted Kernel [ 15.447115] systemd[1]: Finished Load Kernel Module configfs. Debug File System. [ O[ 15.455945] systemd[1]: modprobe@drm.service: Deactivated successfully. K ] Mounted Tempor[ 15.465161] systemd[1]: Finished Load Kernel Module drm. ary Directory /tmp. [ OK systemd[1]: Started Journal Service. [0m] Finished Create List of Static Device Nodes. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Started Journal Service. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished Generate network units from Kernel command line. Mounting Kernel Configuration File System... Starting Create Static Device Nodes in /dev[ 15.527672] openvswitch: Open vSwitch switching datapath gracefully... [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Load Kernel Modules. Mounting NFSD configuration filesystem... Starting Apply Kernel Variables... [ OK ] Mounted NFSD configuration filesystem. [ OK ] Finished File System Check on Root Device. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Create Static Device Nodes in /dev gracefully. Starting Remount Root and Kernel File Systems... [ 15.752302] EXT4-fs (mmcblk0p3): re-mounted 8a19ead7-99ea-4b38-b8ae-2064f9a6dea3 r/w. Quota mode: none. [ OK ] Finished Remount Root and Kernel File Systems. Starting Flush Journal to Persistent Storage... [ 15.823884] systemd-journald[207]: Received client request to flush runtime journal. Starting Create System Users... [ OK ] Finished Flush Journal to Persistent Storage. [ 15.892997] audit: type=1334 audit(1736360578.884:2): prog-id=6 op=LOAD [ 15.899682] audit: type=1334 audit(1736360578.884:3): prog-id=7 op=LOAD [ 15.906349] audit: type=1334 audit(1736360578.884:4): prog-id=8 op=LOAD Starting User Database Manager... [ OK ] Started User Database Manager. [ 16.067452] scsi 0:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 6 [ 16.086440] sd 0:0:0:0: [sda] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 16.095064] sd 0:0:0:0: [sda] Write Protect is off [ 16.100318] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ OK ] Finished Coldplug All udev Devices. [ 16.133055] sd 0:0:0:0: [sda] Attached SCSI removable disk [ OK ] Finished Create System Users. Starting Create Static Device Nodes in /dev... [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Preparation for Local File Systems. [ 16.212061] audit: type=1334 audit(1736360579.204:5): prog-id=9 op=LOAD [ 16.219903] audit: type=1334 audit(1736360579.212:6): prog-id=10 op=LOAD Starting Rule-based Manager for Device Events and Files... [ OK ] Started Rule-based Manager for Device Events and Files. Mounting /var/volatile... [ OK ] Mounted /var/volatile. Starting Load/Save OS Random Seed... [ 16.790914] macb ff0c0000.ethernet end0: renamed from eth0 [ OK ] Found device /dev/disk/by-label/esp. [ OK ] Found device /dev/disk/by-label/boot. [ 17.322509] random: crng init done [ OK ] Finished Load/Save OS Random Seed. Mounting /boot... [ 17.556380] EXT4-fs (mmcblk0p2): mounted filesystem 9ffa64fa-d9a4-45ae-aac1-ea74d746d8b7 r/w with ordered data mode. Quota mode: none. [ OK ] Mounted /boot. Mounting /boot/efi... [ OK ] Mounted /boot/efi. [ OK ] Reached target Local File Systems. Starting Rebuild Dynamic Linker Cache... Starting Automatic Boot Loader Update... Starting Commit a transient machine-id on disk... Starting Create System Files and Directories... [ OK ] Finished Create System Files and Directories. Starting Rebuild Journal Catalog... [ 17.965256] audit: type=1334 audit(1736360580.956:7): prog-id=11 op=LOAD Starting Network Name Resolution... [ 18.016944] audit: type=1334 audit(1736360581.008:8): prog-id=12 op=LOAD Starting Network Time Synchronization... Starting Record System Boot/Shutdown in UTMP... [ OK ] Finished Automatic Boot Loader Update. [ OK ] Finished Commit a transient machine-id on disk. [ OK ] Finished Record System Boot/Shutdown in UTMP. [ OK ] Finished Rebuild Journal Catalog. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Set. [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Starting Virtual Console Setup... [ OK ] Finished Virtual Console Setup. [ OK ] Finished Rebuild Dynamic Linker Cache. Starting Run pending postinsts... Starting Update is Completed... [ 20.181605] Unloading old XRT Linux kernel modules [ 20.192273] Loading new XRT Linux kernel modules [ OK ] Finished Update is Completed. [ 20.219259] zocl: loading out-of-tree module taints kernel. [ 20.272121] INFO: Creating ICD entry for Xilinx Platform [ 21.306718] audit: type=1334 audit(1736360584.300:9): prog-id=13 op=LOAD [ 21.313466] audit: type=1334 audit(1736360584.304:10): prog-id=14 op=LOAD [ 21.320282] audit: type=1334 audit(1736360584.304:11): prog-id=9 op=UNLOAD [ 21.327178] audit: type=1334 audit(1736360584.304:12): prog-id=10 op=UNLOAD [ 21.334154] audit: type=1334 audit(1736360584.312:13): prog-id=15 op=LOAD [ 21.340951] audit: type=1334 audit(1736360584.312:14): prog-id=12 op=UNLOAD [ 21.347929] audit: type=1334 audit(1736360584.320:15): prog-id=16 op=LOAD [ 21.354734] audit: type=1334 audit(1736360584.320:16): prog-id=3 op=UNLOAD [ 21.361620] audit: type=1334 audit(1736360584.324:17): prog-id=17 op=LOAD [ 21.368416] audit: type=1334 audit(1736360584.332:18): prog-id=18 op=LOAD [ OK ] Finished Run pending postinsts. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timer Units. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Docker Socket for the API... Starting sshd.socket... [ OK ] Listening on Docker Socket for the API. [ OK ] Listening on sshd.socket. [ OK ] Reached target Socket Units. [ OK ] Reached target Basic System. Starting Modem Manager... [ OK ] Started Job spooling tools. [ OK ] Started Periodic Command Scheduler. Starting D-Bus System Message Bus... Starting dfx-mgrd Dynamic Function eXchange... Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... [ OK ] Started System Logging Service. Starting User Login Management... Starting OpenSSH Key Generation... [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Reached target Preparation for Network. Starting Network Configuration... [ OK ] Started dfx-mgrd Dynamic Function eXchange. Starting dfx-mgrd Default Firmware Load Service... [ OK ] Started User Login Management. [ OK ] Started D-Bus System Message Bus. [ OK ] Started Network Configuration. [ OK ] Reached target Network. Starting containerd container runtime... Starting Wait for Network to be Configured... Starting Permit User Sessions... Starting Target Communication Framework agent... [ OK ] Started Xinetd A Powerful Replacement For Inetd. [ OK ] Finished Permit User Sessions. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyAMA0. [ OK ] Reached target Login Prompts. [ OK ] Started Target Communication Framework agent. [ OK ] Started Modem Manager. [ OK ] Finished OpenSSH Key Generation. [ OK ] Started containerd container runtime. [ OK ] Finished dfx-mgrd Default Firmware Load Service. AMD Embedded Development Framework Linux distribution 25.05.2+release-S09121046 amd-edf ttyAMA0 amd-edf login: amd-edf You are required to change your password immediately (administrator enforced). New password: Retype new password: WARNING: AMD Embedded Development Framework is a reference Yocto Project distribution that should be used for testing and development purposes only. It is recommended that you create your own distribution for production use. amd-edf:~$